If a router has sip ALG turned on, nat devices behind the router will appear as not nat because SIP ALG replaces the nat address with the wan address in the sip packets. This simulates the same problem you are having. Since 99% of our customers are behind nat we added this to the sip server dial ...

Lucy, Thank you very much for your response. Can i use this string in either v2 or v3? For others reading this post i reformatted the answer to make it easier to read. It appears the commas are the delimiter. Park changed from #8 to #5: fw.com.brekeke.pbx.fw.talker.User.COMMAND_TRANSFER= DTMF:#9 ...

Is it possible to change the built in key for call park to something other than #8? #5 for example?

1. Brekeke Product Name and Version: 2. Java version: 3. OS type and the version: 4. UA (phone), gateway or other hardware/software involved: 5. Your problem: Network Setup: IP Phone --->V3 PBX --->V2 PBX --->SIP Carrier IP Phones use When a user in V3 enters #8 on ip phone endpoint Both v3 and v2 ...

Try the DialPlan rule below.
It returns "200 Ok" to OPTIONS requests.
Matching Patterns
$request = ^OPTIONS
Deploy Patterns
$response = 200

from a previous post

Also, it would be helpful to know how many minutes into the call the audio stopped.

Since it's fo-otball season you could call this a dial plan rule to rule pass. I don't recall ever seeing one on this forum before. Thank you James and dstu!

How about Resource-Priority =
in the dialplan

You can read this on page 14 section 4.3.

http://www.brekeke.com/doc/sip/sip_tuto ... alplan.pdf

So we have the question presented more clearly now. Since the webget is in the matching pattern side of the dialplan, how do we make it conditional upon a 486 busy response? I don't see a way to change the webget values based on the response of the invite. But the question is clearer now so let's ...

I see your point. How do we send an email from a dialplan that is getting executed for busy calls to 192.168.0.100 without sending an email for all calls. We only want email for busy calls to 192.168.0.100. The quandry is both successful calls and busy calls would be handled by the same dial plan so ...

Yes, you can elect to failover only if you are sending to a particular address.

email alert when Any call to a specific IP returns busy. Is that what you are looking for? We had a similar needed to email alert when a deivice failed registration so we could see if anyone is trying to hack. We used windowsh shell program to check the Brekeke log file every 30 seconds for new ...

Version 3 requires Cisco phones to subscribe for MWI. To set this up fill out the following fields in the ext tab. Mailbox ID: set to the Brekeke extension ie 1020 Voice Mail Server: The domain name or ip address of your pbx Voice Mail Subscribe Interval: 1800 This will cause the Cisco SPA phone to ...

Have you found a solution to this. Just discovered the same problem today myself. V2 used to manage the mwi with cisco phones but v3 appears not to in v 3.1.7.8. Cisco does not subscribe. 1.4.2.6 Beta (May 2, 2005) - Supports MWI for the phones which don't send SUBSCRIBE Did this get removed or are ...

Thank you very much.
I will follow your advice on upgrade.

1. Brekeke Product Name and Version:Adv SIP Server 2.4.8.6 2. Java version: 3. OS type and the version: 4. UA (phone), gateway or other hardware/software involved: 5. Your problem: Does anyone know the default timeout of the webget command. Has the net.webget.timeout.connect been implemented in 2.4 ...

Glad to be of help. Brekeke's approach is to stay stealthy and not respond to scan. That is wise. But to stop a scan that is affecting your bandwidth or processor, you only alternative is to 200 ok them away. I should disclose that rather than send an 200 ok every scan attempt, send it only on even ...

I have found that simply not replying does not stop the scan. If you really want to confuse them and stop the scan, send $response=200. Stops the scan every time because the scanner thinks it succeeded and takes the bogus login and password it thinks it succeeded with and sends it to level2 hacking ...

Also, Auth=off should be in your deploy.

can we make user agent matching non case senstive? You can always put in Friendly-Scanner|friendly-scanner _ is the accept = False working? from my tests I do not think it is. You could always add $target=0.0.0.0 into the deploy _ partital matching on user-agent string is this by design? Brekeke ...

Well it may not be in the Wiki, but it's now in the forum.

Thanks Mike! That agrees with my inability to cause the problem once i properly configured and was not receiving any errors.

Are the clients that can not receive calls registered to the Brekeke SIP server and showing up as registered in the Brekeke registered tab ?

Yes, I agree the sessions should show. Sorry to hear everthing might not be realtek. :) I have reason to believe they may add concurrent session counting by user or ip so i wonder if it has made it's way quietly into v3 and stepped on something? If you can determine the type of call that is causing ...

The emulated nic is still subject to the physical nic's problems, but if you had no problems with v2 it does seem to indicate that it's not that. I would still check the physical nic to see if it's realtek. I was testing SCA and BLF in V3 PBX (windows 7) and experienced that but after i configured ...