correction: I did a bad cut-paste - the correct deploy pattern is:

Deploy:
From: "xxxyyy1234"<sip:xxxyyy1234@sip.broadvoice.com>
To: sip:$1@sip.broadvoice.com

Hope, Thanks for your reply. I actually got it to work 10 minutes ago after tinkering some this afternoon. Here is how my ARS looks now. Matching: To: sip:9(.+)@ Deploy: From: "xxxyyy1234"<sip:xxxyyy1234@sip.broadvoice.com> To: sip:$1@proxy.dca.broadvoice.com I think the key was to modify the ...

I only have a Pattern-OUT in the ARS section of the PBX. I do not have anything in the Dial Plan of the SIP Server specifically for Broadvoice. Do I need to have or should there be something basic out-of-the-box that takes care of it? Here is the pattern: Matching: To: sip:([0-9]{7,25})@ Deploy ...

Thanks, Hope.
I actually see that the 9 didn't get stripped out, and the IP in the "destination" column of the wireshark trace is that of the PBX, not of Broadvoice.
It seems that based on what Voipwell also explained, there is a missing session from the PBX to Broadvoice....

I think I figured out what the problem is: I wiresharked the PBX unit while placing a call out. It seems that the INVITE request from my client does not go all the way to the Broadvoice server, but only to the PBX server. Should I not be seeing the IP of the Broadvoice in the Destination rather than ...

1. Brekeke Product Name and version: PBX Version 2.4.3.9 2. Java version: 3. OS type and the version: Windows 7 64-bit 4. UA (phone), gateway or other hardware/software involved: X-Lite UA (3 of them), one in WAN and 2 in LAN, 1 ITSP connection (Broadvoice) 5. Select your network pattern from http ...