1. Brekeke Product Name and Version: Brekeke SIP Server Advabnced Edition - 3.4.6.3 2. Java version: 1.7.0_15 3. OS type and the version: Windows Server 2008 R2 4. UA (phone), gateway or other hardware/software involved: 3CX Softphone (for test) & Avaya Session manager 5. Your problem: I'm trying to ...

1. Brekeke Product Name and Version: 3.4.4.3/408 Advanced Edition 2. Java version: 1..0_15 3. OS type and the version: Win2008 R2 4. UA (phone), gateway or other hardware/software involved: N/A 5. Your problem: Is there any way of getting real time (or nr real time) stats for active calls coming ...

Just to update, got this working and did as expected (once got syntax correct)

I've been looking into it (panic on this morning) and I'm think this would work...problem is it's live so I can't afford to mess it up. [Matching Patterns] $request = ^INVITE From = sip:(.+)@ 192.168.1.2(0-5) $route.underlimit ("MyCarrer", "50") = true [Deploy Pattern] $routename = MyCarrier ...

I'm jumping on this old thread as the fix, could be what I need, but need a bit of help tweaking it.

I need to limit the number of TOTAL calls from a group of IP addresses.

e.g.

Limit to 50 calls in total from
@192.168.1.(1-15)

Also what response is given to call number 51?

Thanks.
Stu..

What is sending the 486 error? The called end point or Brekeke?

A bit of messing around, looking up and wiresharking and it occurred to me this won't work as is. The issue the t.38 is not sent in the initial set-up of the call, but in a re-invite. So the call flow is (basically) SIP Invite > OK > RTP > RE-INVITE > t.38 So I presume I can do a reinvite ...

Ericcc wrote:Try this. It rejects T.38 request with "603 Decline".

Matching Patterns:
$request = ^INVITE
$body("^m.+t38") = .+

Deploy Patterns:
$response = 603

Thanks I'll give this a go and let you know how it goes...

1. Brekeke Product Name and Version: Advanced 3.3.3.1 2. Java version: 1.7.0_15 3. OS type and the version: W2008 4. UA (phone), gateway or other hardware/software involved: N/A 5. Your problem: Is it possible to block T.38 negotiation via the dial plan? I know how to allow the likes of G711a G11u ...

Thanks for that.
Oddly it's not in the V3 document, hence I didn't pick it up.

1. Brekeke Product Name and Version:

Vers 3.1.7

Just a quick question, under the config settings what is the
"External IP address pattern" field for and how it's used, can't find anything about it in the manual or the wiki.

Thanks,
I did that but still didn't work, so battled through and changed every fieild I could find referencing the call orginator and still no joy. I've passed it back to the SIP provider as I've a feelign it's an issue at their end.
Thanks for you help, I may be back!

1. Brekeke Product Name and Version: SIP Server 3.1.7.0 Advanced Edition 2. Java version: 1.7.0.15 3. OS type and the version: Win 2008 STD 4. UA (phone), gateway or other hardware/software involved: Aastra, TeleVantage 3rd party SIP Trunk 5. Your problem: I'm having trouble establishing calls to ...

Hi that seems not to work, I sort of got it working, but for some reason our server is treating it as 3rd party not as a local account. The client it is registered ok, the URI is that of the Brekeke server i.e. 1234@brekekeserver.com:5060 (normal IP phone would be 1234@phoneip:5060) but it see's it ...

1. Brekeke Product Name and Version: SIP Server 3.1.5.8 2. Java version: 1.7.0_13 3. OS type and the version: WinXP (Test-bed) 4. UA (phone), gateway or other hardware/software involved: 3CX (example) > BSS > Vertical Televantage and back 5. Your problem: I'm pulling my hair our here, going to be ...

Ok found this in the Wiki "Example - 1: ------------------------------- [Matching Patterns] $request = ^INVITE $timerange("9:00", "17:00") = true -------------------------------- When the incoming call is between 9:00am and 5:00pm, the call will apply this rule." So ignore this post. Teach me to ...

1. Brekeke Product Name and Version: SIP Server Advanced edition 3.x 2. Java version: TBA 3. OS type and the version: Win2008 R2 4. UA (phone), gateway or other hardware/software involved: N/A 5. Your problem: How do I do "uneven" times. The dial plan give a simple 8am - 6pm sort of scenario, but ...

I can confirm that I use i.e. 9 with no issues (as well as Chrome and Opera and Firefox)

Laurie wrote:> .. I want to forward it on to Device B,

Does Device B accept REGISTER request?

Yes it does, it's almost identical to A.

If we point A Directly to B it works, but for technical reasons, we can't do this, it has to go via the proxy.

1. Brekeke Product Name and version: Brekeke SIP Server , Version 3.0.7.0 Evaluation 2. Java version: 1.7.0_07 3. OS type and the version: Win7 4. UA (phone), gateway or other hardware/software involved: Multiple devices 5. Select your network pattern from http://www.brekeke-sip.com/bbs/network ...

OK resolved the issue. the "Expires" had to be in lowercase oddly enough (didn't think SIP was case sensitve, live and learn) So Matching $request=^REGISTER expires=^0$ Deploy $auth=false $action=REGISTER &net.registrar.thru.allow=false Thanks for your help, also tuaght me a bit about how the SIP ...

Unfortunatly that didn't work. Yes I do want the phone to use SysB when A is down, but I think I know where your going. The server auto-generates the configs (aastra) so annoyingly what we have to do at the moment is create the phone accoutn and then go in and edit the config manually, not a big ...

Sorry bit rushed when I posted it!

Yes I mean unregistration

And the dial plan is pretty basic:

Matching Pattern
$request=^REGISTER

Deploy
$auth=false
$action=register
&net.registrar.thru.allow=true

1. Brekeke Product Name and version: Brekeke SIP Server , Version 2.4.3.9 Standard 2. Java version: 1.6.0_19 3. OS type and the version: Windows 2008R2 4. UA (phone), gateway or other hardware/software involved: N/A 5. Select your network pattern from http://www.brekeke-sip.com/bbs/network ...

Ooops I failed to noticed the rgistration times and indeed it was only registering with one.
However just looked at the advanced edition and this appears that it can do mulitple targets, so would this solve my issue?