Thanks a million Hope, the dial plan works, its has stripped off the 009234 prefix with the ;cpc=ordinary. Thanks again!

Hello

How do i remove all characters and leave only the digits of the caller id:

It looks like this:
0092348135739602;cpc=ordinary@XXX.XXX.XXX.XXX

I would want the caller id to look like this:
08135739602@XXX.XXX.XXX.XXX


Thank you

Thank for the reply, i hope i capture the trace right, this is it: No. Time Source Destination Protocol Info 1 0.000000 Teletron_14:02:69 Broadcast ARP Who has 172.17.17.40? Tell 172.17.17.202 Frame 1 (60 bytes on wire, 60 bytes captured) Ethernet II, Src: Teletron_14:02:69 (00:0d:f5:14:02:69), Dst ...

Yes the dial plan is in use for the call and it works only for the destination number stripping of the +234 prefix.

Thanks for the reply i have implemented the dial plan and have succeded in removing the prefix from the destination number but the caller id prefix still appears as here is a call trace: sip:0092348135739602;cpc=ordinary@anonymous.invalid (62.173.41.131:5060) sip:016260200@41.217.205.27:5060 (41.217 ...

1. Brekeke Product Name and version:PBX 2_3_6_0 2. Java version: 3. OS type and the version: Windows Sever 2003 4. UA (phone), gateway or other hardware/software involved: SVK IVRCat and SVK RadiusCat billing 5. Select your network pattern from http:Pattern 2 6. Your problem: My provider sends my ...

Hello, 1)are both caller and callee registered at sip server? ans: No just the caller is registered to the system 2)what ip address of the caller and callee? ans: The callers ip add is a public ip callee's ip could be static or DHCP. 3)is there any dial plan used for the call? and what dial plans ...

1)what kind of problem do you have when public ip is used? The calls dont go through the session status just shows "inviting" status until i end the call. 2)what calls go through sip server private ip? the calls from gateway? a)Currently only the private IP calls go out since i took out the public ...

Hi Hope,

1) No i'm not behind a router.

2) The PBX Server has 2 NIC.

Would i be needing a router, please advice.

Thanks

MJ

Thanks for your reply sorry i wasnt able to reply for the past few days. I can now make inbound and outbound calls to and from within SIP Server and PSTN. I took out the Public IP because i noticed using wireshark the Public IP was confusing the Private IP. Now my problem is how do i connect to my ...

1) Is number 016264002 a register user phone number at brekeke sip server?

Yes 016264002 is a User phone number registered to the SIP Server

I have add 192.168.12.* to Brekeke NIC

Thanks for replying: 1)which version PBX are you using? I am using PBX/Server: 2.3.6.0/286 2)what Interface IP address can you see from first page after log in pbx? only 10.1.13.1 ? brekeke should be in the same ip range as gateway? I have 3 IPs on my NIC and they are all showing at the page after ...

1. Brekeke Product Name and version: 2. Java version:JDK6 3. OS type and the version:Windows Server 2003 4. UA (phone), gateway or other hardware/software involved:xlite and grandstream HT503 5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :Pattern 2 6 ...

I'm using FXO and i have tried calling from different operators mobile handsets, I dont hear a ringback tone on any of them

1. Brekeke Product Name and version:PBX 2_3_6_0 2. Java version: 3. OS type and the version: Windows Sever 2003 4. UA (phone), gateway or other hardware/software involved: SVK IVRCat and SVK RadiusCat billing 5. Select your network pattern from http:Pattern 2 6. Your problem: I am using brekeke PBX ...