Hi Wolf, If you set "2 stages-Dialing" at the Grandstream, can you make a call to an outside? Also, check your Grandstream's firmware version. It should be the latest. Hmmm, switched to 2 stages, still no go. The firmware is up to date, I swear there's something out that I'm missing, and it's a ...

Wolf, Yeah,, I agree with you. >>It dials, sometimes a brief ring then busy tone, or hangs up. Let me know more details.. If you dial the outside (your cellphone for example) from the SIP-side, you can hear the ring tone on the caller. Right? At that time, does the outside's phone ring too? Nope ...

Also if you need to do the firmware update, refer to this link for help upgrading the firmware. Warning though, once you update to this version, you cannot downgrade to any previous releases. http://www.grandstream.com/user_manuals/GXW410x_User_Manual.pdf Wish you the best, and hopefully it helps ...

hi lakeview, well ya am using Grandstraem 4 port FXO to connect PSTN & theres no VoIP provider involved. what do u think? :) I would suggest upgrading your Grandstream GXW410X to the newest Firmware version 1.0.1.10. Seems to deal alot with voice quality as well as other 'wierd' issues facing the ...

Can you make a call from the outside to a SIP client via FXO gateway? Um no, I don't have it set up to do so, I'm more concentrating on getting it to dial out first, then figure out the dial in. Doing both would be harder to trouble shoot. Same reason why I'm using the one stage dialing. Start ...

>>It dials, sometimes a brief ring then busy tone, or hangs up. Do you have the same problem still? Can you make a call between X-Lite and SpectraLink Ptx150? yeah that's the thing, I can call everything but through the FXO. I have an X-lite setup, the SpecraLink Ptx150 and a Cisco IP Phone 7960 ...

From the post below http://www.brekeke-sip.com/bbs/viewtopic.php?t=6243&highlight=grandstream+gxw4108 Use prefix# (default is 99) + ch# (could be anything from 1 to 8) + dialing# will result in this call forwarded to FXO port (ch#) immediately. And i don't think you need both dialplan and ARS for ...

my fault I guess. It is INVITE, I was too lazy to hold the shift key when I retyped it in my last post. :P So k, so the the ARS and the Dial Plan are fine, the PCMU and PCMA settings are fine for the FXO side. Just so to clarify what I have set that I'm not sure about: Using 1 Stage Dialing, in the ...

Hey taitan, thanks for the quick response!! :o >Is it DialPlan? or Is it ARS?? ARS I have: To:sip:9(.+)@ To:sip$@192.168.8.12 <--GrandstreamFXO DialPlan changed from: $request=^invite To=sip:9(.+)@ To=sip:$1@192.168.8.12 Changed as per your suggestion to: $request=^invite To=sip:9(.+)@ To=sip:%1@192 ...

1. Brekeke Product Name and version: PBX version 2.1.6.6 2. Java version: 3. OS type and the version: Windows Server 2003 4. UA (phone), gateway or other hardware/software involved: Xlite/Cisco 7960series/ SpectraLink Ptx150's/ Grandstream GXW4108 5. Select your network pattern from http://www ...