Is it possible to enter auto attendant mode as described in above,
but user have a choice to :
1) dial in to the extension 2) Dial in to listen to his voice mail.
and how to configure?

Regards
henry

Thanks again.
It works, how do I change voice file on voice prompt.
Now is "if you know your party extension"..change to
"please enter your voice mail phone number"

Regards
Henry

hope,

Thank you, it is working.
The speed dial setting, is it possible to have speed dial not just for one assigned extension only?. I would like the dialing method like,
after IVR, enter 1 and any of the extension to retrieve voice mail.

Regards
henry

1. Brekeke Product Name and version: PBX 2.1.6.6 2. Java version: 1.5.0_14 3. OS type and the version: Window 2003 server 4. UA (phone), gateway or other hardware/software involved: 5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 6. Your problem ...

It seems to me that your are getting what you would like. I guess you have to do more testing. In my case, I setup the dial plan in SIPserver instead of ARS in PBX and it is still working. Perhaps you can try this. I get the feeling that SIPserver Dial plan setting is more stable than ARS in PBX ...

Assuming the extension number is 123 and PSTN number is 2345678. Then, you just put in 123 as caller and 92345678 as callee.

Regards
Henry

Question:
1. What is the version of PBX, 2.0 or 2.1?
2. You said that you can use PBX extension to call PSTN, do you dial 9 and PSTN phone number?

Regards
Henry

Peng,

I have not been deploying PBX in depth, therefore, my experience is on SIP server, did you deploy this "click to call"? If yes, I would like to share your experience as well. Please advise.

Regards
Henry

Hi Colin, I am with you on your comments, I did try other IPPBX and got problem, mostly is due to "dial plan" setup. I am convinced the Brekeke did have experience in Telco routing that other IPPBX designer could have overlooked its importance or didn't have Telco inter connect experience when ...

Thanks for the reply.
However, Support from Brekeke is having the knowledge on product design that they are the only person capable to troubleshoot problem of design nature. We can only help and share from practical experience.

No wonder there are less user using this forum nowadays.

Regards
Henry

You mean, you dial from extension 9 and landline number?
or please tell me the dial rule for calling to PSTN, landline.
Did you configure "dial rule" on the SIP server side, not PBX ARS?
You must set the "dial rule" on SIP server side.

Regards
Henry

Your support team used to reply question from user in this forum in the past, but, not recently, if there a reason?

Regards
Henry :(

Go to the Brekeke PBX server, at the explorer, key http://127.0.0.1:28080/pbx/3pcc?to=222&from=333&user=1 222 is one of your extension and 333 is another extension. Test if it is working, if yes, replace 333 with the land line dialing number which must be same as the dial rule in Brekeke SIP server ...

Please advise can you make call from your PBX to Land phone.
If yes, just tell me the dialing procedure step by step.


Regards
Henry

There are isn't many SIP gateway with 8 ports available in the market, which brand you are using? It is better to deploy one with 16 ports so that when one FXO port is busy, the call will terminate to the next available FOX port.

I think this is what you would like to have.

Regards

Henry

I havn't tried MSN in my life and I have to find time to chat with you. May I know which country you are in and it is possible for 'click to talk' to make call the way you wish. That means, one end you have to use gateway or softphone. On the land line, you need gateway to terminate calls to PSTN. I ...

Dear Niggy,

You must configure "dial plan" in the SIP server, not PBX's ARS, to terminate call to PSTN, otherwise "click to talk" will not work.

Henry

1. Brekeke Product Name and version: PBX 20 (Basic) 2. Java version: 3. OS type and the version: Window 2003 advance server 4. UA (phone), gateway or other hardware/software involved: Linksys 5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 6. Your ...

"click to talk" can make call to land line for both caller and callee.
The connection is depending on the PBX dial plan setting.
I have it working.

Henry

Thanks and you have answered my question.
Next question is regarding "click to call", can any one help to advise how to disable the "response "succeeded: ID number",
after the "click to call" has been activated?

Regards
Henry

Thanks for the reply

Does it mean that for voice email account, the basic will have a maximun of 20 user setup as well?

Regards
Henry

1. Brekeke Product Name and version: PBX Basic 2. Java version: 3. OS type and the version: 4. UA (phone), gateway or other hardware/software involved: 5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 6. Your problem: would like to know what is Max ...

Nike, Regarding ringing tone, before I upgrade the software as you have suggested, I made another test and find out when I use one fixed line provider to call to Ondo server connecting to LInksys, I can hear the ringing tone, whilst others failed to hear ringing tone. In this senario, do you still ...

Nick,

Do you see problem to upgrade 1.3.3.0, any minor adjustment on
setting be required. Thanks

Regards
Henry

I noticed that "Andrea" suggested in the forum that the below is for web call (click to call) Quote http://www.brekeke-sip.com/download/bpbx/bpbx_admin_advanced_en.pdf. which describes the script is http://<server-ip-address>:<server-port>/pbx/3pcc?to=<callee-number>&from=<caller-number>&user ...