Have tried with the domain name added as an interface at Configuration -->System page. But still getting 403 from SIP server.

Note: The same setup was working earlier.

The issue does not occur when IP address is mentioned. As mentioned, this is a localised lab setup and there are no routers in between. Moreover the Reigster packets are reaching the SIP server, the issue is that the SIP Server is responding with 403 forbidden when the Register messages have domain ...

We are using Domain name as part of testing the UA functionalities
This is a localised lab setup.

Does the SIP Server use own global IP address? This is a lab setup, which has localised subnet. SIP Server, UA's are within the same subnet. SIP Server has its own adress Is the SIP Server's domain name associated with this IP address? Yes Does the SIP client UA use own global IP address? Yes, UA ...

Is the SIP server located behind NAT?

User Agent, SIP Server are in the same subnet. NAT is not required.

Is the doman's IP address always same? Yes

Does the issue happen if you use SIP Auth for REGISTER? Yes, Issue occurs even when the SIP Auth is On/Off.

Hi, The issue has again cropped up , even after adding the domain as an interface at [Configuration]. The registration requests from User agent is coming with Domain name, and the Brekeke SIP server is responding with 403 Forbidden message. As mentioned earlier,when the registraion requests has ...

We have Brekeke with below details.

V2.4.8.6 ,Standard.

Need to check if any contact with Brekeke team

We have got one license for Brekeke server, but not partners to Brekeke.

Is there any other way you can help me on this please ?

I am trying to automate few scenarios for our testing using ITest.
Hence wanted to know the commands to change the settings of the SIP server, which would help me in implementing the same in the script.

I am trying to automate RTP packet loss scenario through ITest.
Hence wanted to know the commands to do it via command line, so that it would be helpful in incorporating in the automated script.

1. Brekeke Product Name and Version: V3.3.5.8 (Evaluation) 2. Java version: 3. OS type and the version: Windows XP 4. UA (phone), gateway or other hardware/software involved: UA 5. Your problem: Request to provide the commands [thru command line ] to change the interface address of the Brekeke ...

The requirement is to get the commands to disable RTP montioring on the Brekeke server for some time without disconnecting the existing sessions . After which we should be able to enable the RTP monitoring and the RTP path should resume back for the existing connections.

1. Brekeke Product Name and Version: 3.3.5.8 Evaluation 2. Java version: Version 7 3. OS type and the version: Windows XP 4. UA (phone), gateway or other hardware/software involved: 5. Your problem: Request to provide commands to disable/enable RTP monitoring on the Brekeke server , if possible for ...

Thanks for the inputs. Its working now.

Hi, When the registration requests from User agent is coming with Domain name, the Brekeke SIP server is responding with 403 Forbidden message. But when the registraion requests has domain name as IP address , the server is responding to the requests properly. Note: Have entered the correct domain ...

Forgot to mention, after clearing the blocked list its working fine.
Thanks once again

The blocked list had the list of the IP's of the user agents for which we were facing the issue. Not sure what made them to get blocked.

Anyways, thanks Harold for your valuable inputs.

One more point which I noticed now is, if the IP of the same UA is changed, than the SIP Server is responding to the registration requests sent by the UA.

Request for your reviews on the observed behaviour.

We are using Vendor specific SIP User agents.
Haven't tried with Linphone or X-Lite yet.
We have dial plan rules set for Invite, nothing set for Register.


Note: The same user agents which were working earlier with the same number registered , is not working now.

Yes the IP address is the same. Able to capture the Register requests on the same PC where SIP server is installed , but the Server is not responding to register messages. One more interesting point I noticed is, the SIP server is repsonding to register requests from few User agents , but not for ...

Earlier after disabling the firewall V3.3.5.8 (Evaluation) , SIP server was working fine. But now again the same issue of SIP server not responding to registratiom messages has cropped up. What other changes do you suggest for this version with firewall setting disabled ? What could be the reason ...

Thanks for the inputs.
After disabling the firewall on the PC, Server is responding to registration requests.

1. Brekeke Product Name and Version: V3.3.5.8 (Evaluation) 2. Java version: 3. OS type and the version: Windows XP 4. UA (phone), gateway or other hardware/software involved: UA 5. Your problem: I have installed Brekeke Server ( Version 3.3.5.8 Evaluation) on Windows XP PC. The server is not ...