this is what my Dial Plan does now: i match for Invites i take the 10 digits in the TO field i check in the Alias Table what is the value of the REG column for this phone number (i get the phone number from doing: To = sip:(.*)(\d{10})@) i check what is the IP Address of the Registered SIP Client (i ...

made by REGISTER request to brekeke server

i have some phone numbers which i want to route to another IP Address, but some Phone Numbers i need to route it to a SIP Peer that is registered to the Brekeke... how else can i accomplish it

i want to take whats in the To Field, and match if i find that value in the Alias Table the Alias Table also has 2 other fields, 1 says "Register", and the other has the Customers Registered Sip User Name so after i do the Alias Table lookup, if it is "Register" then i will send the call to the ...

1. Brekeke Product Name and Version: 3.5.5.2 Advanced 2. Java version: 1.8.0_91 3. OS type and the version: Windows Server 2012 R2 4. UA (phone), gateway or other hardware/software involved: SIP Proxy Server 5. Your problem: i would like to build a Dial Plan that will have a IF clause IF the Alias ...

in the current version it is not possible ? that if a call does not go thru, it should be able to use the next dialplan to terminate the call

1. Brekeke Product Name and Version: 3.5.5.2 Advanced 2. Java version: 1.8.0_91 3. OS type and the version: Windows Server 2012 R2 4. UA (phone), gateway or other hardware/software involved: SIP Proxy Server 5. Your problem: i have several providers i can use for outgoing calls, i want to be able to ...

did you get an update ?

im also interested in setting up that if a call does not go thru for whatever reason, it should failover to the next dial plan rule i have (which is to use another carrier)

1. Brekeke Product Name and Version: Brekeke SIP Server Version 3 2. Java version: 3. OS type and the version: 4. UA (phone), gateway or other hardware/software involved: 5. Your problem: when i reboot my server, and the brekeke service starts, i cant load the GUI i am getting an error HTTP Status ...

this issue was happening when i was NOT using any third pparty DB or radius

and is still happening even when i use a mysql db

yes it still happened, July 21 is last time it happened

here is the logs 151313 10:13:30.2664062s - ---------- Log File Opened ----------------- 151313 10:13:30.2664062s - CurSpc:15625000ns BaseSpc:15625000ns SyncToCmos:Yes 151313 10:13:30.2664062s - PerfFreq:2337910c/s 151313 10:13:30.2664062s - ReadConfig: Found provider 'NtpClient': 151313 10:13:30 ...

wow, i just looked and saw time sync was on

i turned it off again now, and lets see what happens

what should i look for in the log that would indicate there was an issue ?

ill try it on my backup server, but its a linux server

on the windows machine i disable the windows time service from updating the clock automatic

i disabled the time clock updater, and it is still happening

its been turned off for months ever since the issue started

still i can try to set the value to 0 instead of what its now, if you beleive it may help?

i had the same issue with previous version 3.4.x.x versions

how can i check on my system if the system has a system-clock issue?

this is happening on a Linux and a Windows installation


was the value of 0 for the stacked timer introduced only in 3.4.7.0?

Brekeke support told me to use this setting:
net.dispatcher.max.stacked.time = 86400000

and thats what ive been using, are you asking me to change it?

can you explain what this does and how will the new change effect ?

$request = ^OPTIONS $auth = false $action = 200 all SIP traffic is effected most likely, i dont know for certain how i can proov it but int he past when i used this for all my incoming and outgoing calls, when i get an alert from my monitoring system that it didnt receive a reply for the OPTIONS, at ...

i have MANY OPTIONS messages a minute, and so does all my other servers

so i doubt its related to the OPTIONS being sent, why do you suspect it is ?

i dont see anything in the error logs, what should i search for ?

Dial Plan History Details No. 75064 Session ID n/a Rule _OPTIONS Time (received) 07/15/15 23:45:35.416 Time (Dial Plan IN) 07/15/15 23:45:35.416 (0ms) Time (Dial Plan OUT) 12/31/69 19:00:00.000 (-1437018335416ms) Source IP 69.200.100.12:5060 (UDP) Destination IP n/a Action 200 Incoming Packet ...

i updated to the latest version 3.4.7.0 and its still happening

the IP Address in the request URI matches the interface IP

and the FQDN points to this server


the problem is with 2 version 3.4.7.0 servers,,,

but with version 2.4.8.6 it does not happen

most of them are pointed to the IP Address, it might be there are some doing it based on FQDN

i get OPTIONS all day long from several monitor servers, i doubt that would cause it where would you recommend i check on the network? when i was running Version 2 it was perfect, and it actually still is only Version 3 has the bug on the same hardware we see a different when Version 2 runs or when ...

MySQL Runs, im able to connect and query the DB

1. Brekeke Product Name and Version: server-product Brekeke SIP Server server-ver 3.4.6.3/411 2. Java version: java-ver 1.6.0_45 3. OS type and the version: os-name Windows Server 2008 R2 os-ver 6.1 4. UA (phone), gateway or other hardware/software involved: 5. Your problem: several times thru out ...