I strongly recommend that you upgrade your Brekeke SIP Server to the latest version. Thanks Mike, but I guess that means a box rebuild to get a new OS, newer Java and newer tomcat. I was hoping for a quick fix for now until I have the time to rebuild. Can you make available 3.2 please? Regards Wayne

1. Brekeke Product Name and Version: 3.0.6.3 Advanced 2. Java version: 1.7.0_05 3. OS type and the version: Centos 6 4. UA (phone), gateway or other hardware/software involved: Various, used as SIP registrar for 500 endpoints 5. Your problem: Been using BSS for a very long time over 16 years ...

OK I get it, the command only returns records if you have Zombies, just tried it when I caused a call to fail to 603 and got a record ending with Closing (zombie),,

Hi Mike, thanks for the updates. I tried the URL and get the following error:-

failed
invalid index

This is regardless as to whether a call is in progress or not.

Regards

Wayne

Agreed, everytime I leave a pcap running the issue doesn't occur! will persist, however I don't think BSS is missing any signalling, more that it is failing to update the 'active sessions' counter for some reason. If the sessions were really hung, then as I have seen in the past, they would display ...

It's actually a VM, running on VMware ESX ver 4, so emulated NIC.

I have the version 2 machine running under VM without issue, but it is a windows box, whereas we are using Centos for Ver 3.

1. Brekeke Product Name and version: Standard Version 3.0.6.3 Evaluation 2. Java version: 1.7.0_02 3. OS type and the version: Centos 2.6.32-220.23.1.el6.x86_64 (64bit) 4. UA (phone), gateway or other hardware/software involved: Various 5. Select your network pattern from http://www.brekeke-sip.com ...

1. Brekeke Product Name and version: 2.2.7.8/276 2. Java version: 1.5.0_06 3. OS type and the version: Win2k3 web sp1 4. UA (phone), gateway or other hardware/software involved: ANY 5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : ANY 6. Your problem ...

wayne106, Did you ever get a solution for this ? I am having similar issues where the session timeout is not working even with RTP-Relay "on" or "Auto". Some calls are not tearing down. I have done lots of stuffs even usning $b2bua=true and &net.sip.addrecordroute.lr , &net.sip.addrecordroute etc ...

tried both 'Auto' and 'on' in either case the call is not cleared after the timeout and wireshark confirms the RTP is going via BSS, anyone got any ideas?

Thanks

Wayne

>Are you using a billing plugin such as a Radius plugin with >Brekeke? >Which gateway product are you using? Hi James, its a very simple implemenation, no radius plugin, sending to either a softswitch or cisco gateway, all calls are using RTP relay >If you want to use the RTP session timeout, you ...

Following up my own post, it appears the RTP session timeout is not working, I have it set to 600000 which should be 10mins, but after 10 mins of no RTP (eg if the SIP phone is unplugged) the call is not cleared, is my understanding wrong? If the IP connection is lost surely the RTP will dry up ...

1. Brekeke Product Name and version: Version 2.1.6.6 Standard 2. Java version: 3. OS type and the version: win 2k3 web 4. UA (phone), gateway or other hardware/software involved: any 5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 6. Your problem ...

I tried a phone that was on a real IP and disabled RTP relay and there is no loss, so its definitly BSS thats dropping the packets while its relaying. I have rebooted it, and stopped the firewall and its still the same. I might try and install a demo version on another PC and see if it does the same ...

Are you using Brekeke PBX too in the environment? How about the CPU usage in the Win2003 server while you are on a phone call? Can you disable the RTP-realy at the SIP Server? Hi, Thanks for the reply, The CPU usage is nothing, its a fast box quad Xeon and so far only has 1 session in progress at a ...

1. Brekeke Product Name and version: Brekeke SIP Server , Version 2.1.6.6 Standard 2. Java version: 1 .5 .6 3. OS type and the version: Win2003 svr web edition 4. UA (phone), gateway or other hardware/software involved: Sipura 941 I am trying to migrate from Asterisk to BSS My BSS server is ...

Thanks for that, I did have a good look around but I might have missed the archives, the word I should have been looking for was bind! Solution is this anyway in case anyone else has this problem:- in sv.properties net.bind.interface=212.x.x.x net.net1.interface-restrict=100.x.x.x restart whole ...

Hi I have had this problem, but it was due to ping issues, basically the called / calling gateway would ping my server IP to make sure I was still alive, so 90 seconds after connect it would ping and if it got no reply (regardless of call state RTP etc) the call would drop. As my server had ICMP ...

1. Brekeke Product Name and version: BSS Standard 2.1.6.6 2. Java version: 1.5.0.06 3. OS type and the version: Win2k3 web edition 4. UA (phone), gateway or other hardware/software involved: Any 6. Your problem: moving my BSS setup over to its live environment, and have come up with a problem, I ...

1. Brekeke Product Name and version: 2.1.6.6 standard This ones a toughy, but a solution would save me a whole load of code! Basically I have an external voicemail system running with BSS. When a user gets a new message I can get it to call (send an invite) to say new message, and another call when ...

I do it by using radius and an a third party DB (mssql 2005). Now with pal, you can also use pal to put the calls in a db. Hi Nick, are you using some middleware to receive the radius info then insert it into SQL? If so do you mind me asking which package you are using? Also I thought PAL only ...

BSS 2.1.6.6 Standard

Does anyone know of a way to get CDR's out of BSS ideally into SQL?

I see that there is a way to do this with radius, but ideally I need them in SQL, or even as a HTTP push (maybe via a plugin)

Any suggestions much appreciated.

Thanks,

Wayne

Hi, I did set it to localhost:5060 as I assumed that the call would then represent itself from its own IP and be allowed, I copied my original config from the ITSP examples, and it used to work with the older version, although I think I was using localhost:15060 - I'm not sure why this worked either ...

1. Brekeke Product Name and version: BSS 2.1.6.6 2. Java version: 1.5.6 3. OS type and the version: W2k3 web edition 6. Your problem: Since I upgraded to 2.1.6.6 to fix the external DB issue, I now have a problem with incoming calls, my dial plan is this:- $addr=^a\.b\.c\.d $request=^INVITE To ...

Hi, I upgraded it and its working! So thanks for your and Nicks help, I'm guessing that Brekeke found the bug and fixed it.

Wayne