Junel, Based off the question of using a dial plan, you need to send an invite first to the Brekeke Sip Server. Here is a basic Dial Plan I've made to for routing calls. You can try this, and use your local IP for the Domain. Humble Suggestion: First just make sure you have your X-Lite Softphones ...

1. Brekeke Product Name and Version: So whats the feedback of users running the SIP Server on Linux ? or you would much rather run it on Window ? Izzyg, You have asked a very smart question! My Opinion: Brekeke is built to run much better on Linux versus Windows. It's alot more technical based Sip ...

Deploy Patterns $rtp=true $b2bua=true To=sip:2139991000@166.10.0.6:4000 This is how you would want to set your deploy patterns to route to a different sip server with another port number in the To=Field if your number was 2139991000 and the sip server's ip was 166.10.0.6 using SIP port 4000. Hope ...

All, Here is the settings I used to make Skype Connect work both ways on the Brekeke Sip Server LIKE a PBX using UPPER REGISTRATION inbound/outbound working[ONLY USING sip.skype.com + brekeke registrars] Skype Connect Register via Brekeke Sip Server UPPER REGISTRATION from softphone [WORKING ...

Hi Laurie, Thank you for the major tip. I knew someone here would clue me into what I was missing... I tried what you suggested and noticed when the call was coming into the server, since this was using the Brekeke Sip Server directly for the registration and session details showed to-if as LAN IP ...

I can also try the following routing JUST the Skype Number and still not getting through when this is registered via LAN: Here are the screenshots of what is happening: Active Sessions: http : //tinypic.com/r/rrnmgi/8 Session Details of Call: http : //tinypic.com/r/10r0fiw/8 CURRENT DIAL-PLAN ...

1. Brekeke Product Name and Version: Brekeke Sip Server Version 3 2. Java version: 1.6 3. OS type and the version: CentOS 5.8 4. UA (phone), gateway or other hardware/software involved: Skype Connect + Counterpath Bria 2.4 Professional 5. Your problem: I would like to know how to build the best dial ...

Brekeke Users, I have configured a better way to route outbound with Skype Connect SIP Profile! Use this instead of the other dial plan for OUTBOUND and your call will register with Skype and ring as a normal call flow should with Brekeke Sip Server! TESTED : Cisco IP 7960 + Brekeke Sip Server V.3 ...

Router 58.250.168.3

Interface address 1 = 58.250.168.3
Auto interface discovery = off
External IP address pattern = BLANK

You can also setup a STUN Server on your server and try using upper registration if you are trying to register to an ITSP.

Let us know if that helps you,
Thanks,
Kent C.

Guys please help me with this one, i need to Set this up soon. Thanks! Genom88 Hey what's up! I see what you're talking about. What you should do is actually pass the traffic outbound from the extension from your pbx over to the Brekeke Sip Server. From there, I recommend you try out THRU ...

Here's the needed details if you wish to use XP with Firewall : RECOMMENDED BREKEKE WIKI LINK: http://wiki.brekeke.com/wiki/Using-Brekeke-product-with-a-firewall Using Brekeke product with a firewall If you are using a firewall in the same machine where Brekeke product is working on, STEPS: Add ...

1. Brekeke Product Name and Version: 3.3.4.4 Advanced 2. Java version: 1.8.0_11 3. OS type and the version: Windows Server 2012 R2, version 6.3 4. UA (phone), gateway or other hardware/software involved: doubango r1025, imsdroid android app. 5. Your problem: After logout and login many times or my ...

my 'underlying' VoIP service provider May I ask who is your ITSP? Do they allow REGISTRATION authentication option on your account CP? If so, you should switch to THRU or UPPER REGISTRATION on Brekeke Sip Server and then use the same sip:uri to register the Brekeke Sip Server DIRECTLY to ITSP using ...

1. Brekeke Product Name and Version: SIP Server 3.0 2. Java version: Not sure 3. OS type and the version: Windows 7 Pro 4. UA (phone), gateway or other hardware/software involved: 3CX IP PBX connected to Brekeke SIP Server 5. Your problem: I'm evaluating the Brekeke SIP Server to see if I want to ...

Hi ambrosio, Thanks for the awesome tip! I will add this to my list of advanced commands to use. Appreciate the feedback. I looked and the Cisco Secure Mobility Client was added back now working as expected with still the 1 interface on the sip server as needed. Still don't know how that ghost IP ...

1. Brekeke Product Name and Version: Brekeke SIP Server , Version 2.2.7.8 Standard 2. Java version: $ java -version java version "1.6.0_22" Java(TM) SE Runtime Environment (build 1.6.0_22-b04) Java HotSpot(TM) Client VM (build 17.1-b03, mixed mode, sharing) 3. OS type and the version: Microsoft ...

Hi Mike! Thanks for making that adjustment. Here is more information on a very detailed thread regarding SIP and GV: https :// productforums.google.com/forum/#!topic/voice/kQkJGS3STYk Basically, you will need to forward your Google Voice # to a DID and route into your pbx/sip server. As for outbound ...

1. Brekeke Product Name and Version: Brekeke Sip Server 2.4.8.6 2. Java version: JRE 1.6 3. OS type and the version: Windows XP SP3 [XP Embedded Windows Updates till 2019] 4. UA (phone), gateway or other hardware/software involved: Counterpath Bria 2.4 Professional 5. Your problem: Google Voice: Q ...

taitan wrote:They have a wiki topic.
http://wiki.brekeke.com/wiki/Skype

HI Taitan,

Maybe my method they add to the Brekeke Wiki for "Brekeke Sip Server" since that's for "Brekeke PBX ARS" configuration.

Thanks,
Kent C.

Still working on the inbound and DID aspect. That's tricky. Hello Brekeke Sip Server / Skype Users, Here is the methods I have discovered work for Brekeke Sip Server [Not PBX] for Skype : INBOUND SKYPE DID-REDIRECT Step One: Sign up for Ipkall.com *Use the following link below for instructions, but ...

Try the following dial plan, with more detail ID and should work without issue: [This will use any ANI dialed] Matching Patterns $request = ^INVITE From = sip:(.*)@ To = sip:(.*)@ Deploy Patterns: From = sip:%1@LAN.SERVER.IP To = sip:%2@LAN.SERVER.IP Add each user in User Authentication . Then load ...

Oh ok.. Refer to the page 33 in the following PDF. http://www.brekeke.com/doc/sip/sip_admin_v3.pdf It is the ver3's document. I'm not sure ver2's GUI is same... Brekeke SIP Server 2.4.8.6 Advanced has the following in : Configuration > Sip Performance Optimization (Proxy) Initial threads *Advanced ...

1. Brekeke Product Name and version:Brekeke SIP Server , Version 2.1.6.6 2. Java version:1.6.0_07 3. OS type and the version:Windows XP 5.1 4. UA (phone), gateway or other hardware/software involved: 5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 6 ...

Hi, Skype does not use SIP. Brekeke is a SIP server. There is no software interopability. Actually, Skype DOES use SIP . You have to sign up in the business section for a Skype Manager Account [That account can be for family based but it's aim is toward businesses]. Check out: www.skype.com/en ...

Tata, Thank you for the detailed explanation. I made a typo in my post earlier. I have also corrected that now. I'm excited to get Callcentric.com to work because their Tech Support had no idea how to route outbound. What I noticed weird is Brekeke Sip Server does the registration for my softphone ...