Adding a Cisco 7921 to A Rauland Responder 5 demo Kit

[optimusprime]

1. Brekeke Product Name and version:Standard - 2.1.6.6

2. Java version:1.6.0_05

3. OS type and the version:MS Xp Pro SP3

4. UA (phone), gateway or other hardware/software involved:Cisco 7921, Cisco CM8, Rauland Responder 5 demo, Ascom I75, Polycom Spectralink 8030.

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :all on the same LAN no internet so I think Net Pat 1

6. Your problem:I am receiving calls to the Cisco 7921 from all stations in the demo
( I.E ) bed stations, Staff Terminals, Pull cords, Ect. Also we have an Ascom I75, and a Polycom Spectralink 8030, sucessfully receiving and making calls. Everything calls the new Cisco 7921, and I have 2 way comms, but I can not call any stations or other phones

Matching Patterns

$request = ^INVITE To = sip:(7.+)@

Deploy Paterns:

To=sip:%1@192.168.27.251


The cisco 7921 ext is 7000.
CM8 ip is 192.168.27.251

In Config:
Authorization: Reg & Invite are off

RTP relay is set to on

Client (Cisco 7921) is reg as 7000
sip:7000@192.168.27.202:5060

I have noticed there that on the requester settings it comes up as
192.168.27.125:1949 not :5060 like the other 2 phones.

Can you advise

[hope]

set the following in Brekeke SIP Server Configuration/Advanced page

net.sip.loglevel.file=255
net.listener.loglevel.file=255

restart sip server

and make call from cisco 7921 to a registered number at brekeke

check latest sv log for any error and response
sv log is at webapps\proxy\WEB-INF\work\sv\log\2012\08\

[davi]

Vinnie,

> Client (Cisco 7921) is reg as 7000
> sip:7000@192.168.27.202:5060

Do you mean the CISCO 7921 makes a registration to the Brekeke SIP Server?


> I have noticed there that on the requester settings it comes up as
> 192.168.27.125:1949 not :5060 like the other 2 phones.

You don't have to worry about it.
It can happen if a phone sent REGISTER from non-5060 port.


The issue is.. the CISCO 7921 can not make a call. Is it correct?

[optimusprime]

Do you mean the CISCO 7921 makes a registration to the Brekeke SIP Server?

I have to add as a new client to register.


The issue is.. the CISCO 7921 can not make a call. Is it correct?

Yes that is correct.

[optimusprime]

net.sip.loglevel.file=255
net.listener.loglevel.file=255

restart sip server

and make call from cisco 7921 to a registered number at brekeke

check latest sv log for any error and response
sv log is at webapps\proxy\WEB-INF\work\sv\log\2012\08\

I have done this, but Being the Brekeke is on the Rauland R5 Demo kit, I am having trouble finding the sv log. I have no problem at any of our facilities to find it, just the demo. Any suggestion? Rauland is also looking into it, Thanks.

[davi]

In the SIP Server, go to the [Server Status] page.
There is the [work-directory] field.


You can find sv.xxx.log under the following folder.
<work-directory>\webapps\proxy\WEB-INF\work\sv\log\2012\08\

[NMorales]

I am a Rauland integrator also. I think I know your issue. In their documentation they have the information worded funny.

The deploy pattern should be pointed at the Brekeke not at the PBX or BRC.