Author |
Message |
Venot Brekeke Newbie
Joined: 29 Feb 2012 Posts: 3
Location: France
|
Posted: Wed Feb 29, 2012 4:37 am Post subject: Disable relay for SoftPhone on same LAN |
|
|
1. Brekeke Product Name and version: Brekeke SIP Server 2.4.8.6 Standard
2. Java version: jre6
3. OS type and the version: Windows 2008 Server
4. UA (phone), gateway or other hardware/software involved: UA Phones
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : Pattern 5
6. Your problem:
My Brekeke is public. I would like that RTP messages between the SoftPhones on the same LAN are done without relay on their private address. If I disable RTP relay ($request=^INVITE => $rtp=off) the relay is disabled but the SoftPhones contacts themselfs on the public IP of LAN1 instead of their private IPs.
Is there a way to achieve this ?
Kind regards
Etienne |
|
Back to top |
|
Harold Brekeke Master Guru
Joined: 21 Sep 2008 Posts: 289
Location: Japan
|
Posted: Wed Feb 29, 2012 11:02 am Post subject: |
|
|
It depends on softphone.
If a softphone has a feature to detect the public IP address, you need to disable the feature.
If you find the "STUN" or "UPnP" at the setting of the phone, disable it. |
|
Back to top |
|
Venot Brekeke Newbie
Joined: 29 Feb 2012 Posts: 3
Location: France
|
Posted: Thu Mar 01, 2012 1:42 am Post subject: |
|
|
Hello,
Ok. After other test, I found that only SoftPhones that support the ICE protocol can achieve this correctly.
Thanks,
Etienne |
|
Back to top |
|
Harold Brekeke Master Guru
Joined: 21 Sep 2008 Posts: 289
Location: Japan
|
Posted: Thu Mar 01, 2012 10:29 am Post subject: |
|
|
Venot,
which soft phone product are you using? |
|
Back to top |
|
Venot Brekeke Newbie
Joined: 29 Feb 2012 Posts: 3
Location: France
|
Posted: Thu Mar 01, 2012 10:31 am Post subject: |
|
|
One home made SoftPhone... So I think the only way is to implement the ICE protocol on our SoftPhone.
Regards,
Etienne |
|
Back to top |
|
|