Author |
Message |
juanmanuel Brekeke Guru
Joined: 04 Mar 2009 Posts: 107
Location: Medellin,Colombia
|
Posted: Mon Apr 04, 2011 7:30 am Post subject: Forbidden and Proxy Authentication required |
|
|
1. Brekeke Product Name and version:PBX V.2.4.8.6
2. Java version:
3. OS type and the version:
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
I want to know who returns the messages Forbidden and Proxy Authenticaction required, they occurs when the rule in brekeke sip server dial plan does not exist?, or when the ARS does not exist at Brekeke PBX?
Thanks _________________ Juan Manuel Acevedo
Medellin, Colombia
email:jacevedo@e-global.com.co |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Mon Apr 04, 2011 10:36 am Post subject: |
|
|
when pbx/sip server auth is on for invite, if there is no dial plan for caller to set auth off or no user authentication account for caller, sip server will send 407 and 403 |
|
Back to top |
|
foneguy9 Brekeke Newbie
Joined: 05 Apr 2011 Posts: 1
Location: Los Angeles, CA
|
Posted: Tue Apr 05, 2011 4:16 pm Post subject: I get the same error... |
|
|
=== RCVD 192.168.120.87:5060 [493 bytes] ===
(seqNum[4927] - 7:04/04/2011 04:59:32pm) tSip: SIP_CAPTURE: SIP/2.0 407 Proxy Authentication Required
(seqNum[4928] - 7:04/04/2011 04:59:32pm) tSip: SIP_CAPTURE: Via: SIP/2.0/UDP 192.168.120.155:5060;branch=z9hG4bK-9a5b63-1c2e4
Then a bit later:
7:04/04/2011 04:59:32pm) tSip: SIP_CAPTURE: === RCVD 192.168.120.87:5060 [359 bytes] ===
(seqNum[4994] - 7:04/04/2011 04:59:32pm) tSip: SIP_CAPTURE: SIP/2.0 403 Forbidden
(seqNum[4995] - 7:04/04/2011 04:59:32pm) tSip: SIP_CAPTURE: Via: SIP/2.0/UDP 192.168.120.155:5060;branch=z9hG4bK-9a5b63-1c2e5
I'm using: Brekeke SIP Server rev.286.3 Evaluation
Do you have a template that can be applied for the dialplan with a generic setup? |
|
Back to top |
|
juanmanuel Brekeke Guru
Joined: 04 Mar 2009 Posts: 107
Location: Medellin,Colombia
|
Posted: Wed Apr 06, 2011 9:30 am Post subject: |
|
|
Hi
I have one Universal rule for Dial Plan at Sip Server:
Matching Patterns | $request = ^INVITE
|
Deploy Patterns | Route = $target = 127.0.0.0:15060 $transport = udp $b2bua = true $auth = false
|
With this rulke it accepts any call from any caller, you can limite the origin ip adding at deploy patterns:
$addr=Origin_IP_addr _________________ Juan Manuel Acevedo
Medellin, Colombia
email:jacevedo@e-global.com.co |
|
Back to top |
|
|