Switch dial plans when first dial plan fail

[rachel]

1. Brekeke Product Name and version: Brekeke SIP Server 2.3.8.4/286

2. Java version: 1.6.0_16

3. OS type and the version: Windows 2003 5.2

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem:
Hi,
Could you please help me to create a dial plan to automatic transfer a dial plan to the next dial plan if the first dial plan fail to work. The reason for this is because I have problems with route termination sometimes don't work so I need to immediately switch to the second route.

For example: I have 2 dial plans:
Matching1:
$request=^INVITE
To=sip:(1.*)@

Deploy1:
To=sip:%1@IP address 1
$continue=false
$session=com.sample.radius.proxy.RadiusAcct
$auth=false

If IP address 1 (route 1) in dial plan1 don't work, then the calls should be immediately switch to dial plan 2 (route 2)

Matching 2:
$request=^INVITE
To=sip:(1.*)@

Deploy2:
To=sip:%1@IP address 2
$session=com.sample.radius.proxy.RadiusAcct
$continue=false

Thanks for your help

[hope]

check wiki post
http://wiki.brekeke.com/wiki/multiple-targets-failover
http://wiki.brekeke.com/wiki/How-to-make-Failover-in-the-Dial-Plan

need advanced sip server

[taitan]

Also.. if you are Brekeke PBX user, you can use ARS (Automatic Route Selection) Failover.

[rachel]

Does this need advance edition as well? Where do I get the document?
I currently have a brekeke PBX with SIP. I have dial plans in SIP only. Can I have ARS in PBX while dial plans in SIP, does it work that way?

[taitan]

> Does this need advance edition as well?

No.
All editions of Brekeke PBX have ARS feature.
You don't have to use Brekeke SIP Server Advanced Edition.


> Where do I get the document?

http://www.brekeke-sip.com/download/bpbx/v2_x/bpbx_admin_basic_en.pdf
http://www.brekeke-sip.com/download/bpbx/v2_x/bpbx_admin_advanced_en.pdf


> Can I have ARS in PBX while dial plans in SIP, does it work that way?

Yes!