Author |
Message |
noiptel Brekeke Talented
Joined: 22 Feb 2010 Posts: 68
Location: USA
|
Posted: Mon May 31, 2010 7:06 am Post subject: How to monitor end points with XYMON via Brekeke |
|
|
1. Brekeke Product Name and version:
2. Java version:
3. OS type and the version:
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
We have various remote Quintum Tenor endpoints with dynamic IP internet service.
All Quintums register every 300 seconds to our Brekeke SIP Server.
How can we use the IP address information reflected on the SIP Server to monitor our Quintum network via XYMON or any other network monitoring application?
Thanks |
|
Back to top |
|
taitan Brekeke Master Guru
Joined: 15 Mar 2008 Posts: 237
|
Posted: Tue Jun 01, 2010 1:38 pm Post subject: |
|
|
You can monitor updated client's remote IP addresses at the Registered Clients page.
Does it meet your requirement? |
|
Back to top |
|
noiptel Brekeke Talented
Joined: 22 Feb 2010 Posts: 68
Location: USA
|
Posted: Wed Jun 16, 2010 7:23 am Post subject: |
|
|
In the past we used Xymon to monitor our remote Quintum network via DNS as all of our remote Quintums have Dynamic IP internet service. Now that we have incorporated the Brekeke SIP server into our network we can no longer use DNS.
Do you know of a network monitoring application (perhaps similar to Xymon) that will work by using the IP's posted on the Registered Clients page?
Xymon is a system for monitoring of hosts and networks, inspired by the Big Brother system. It provides real-time monitoring, an easy web-interface, historical data, availability reports and performance graphs. Xymon was previously known as "Hobbit".
http://sourceforge.net/projects/hobbitmon/
Thanking you in advance. |
|
Back to top |
|
taitan Brekeke Master Guru
Joined: 15 Mar 2008 Posts: 237
|
Posted: Wed Jun 16, 2010 3:02 pm Post subject: |
|
|
Ok. I understood.
Which edition of SIP Server are you using?
If you are using Advanced Edition, you can use Failure Notification feature for monitoring a SIP UA.
http://wiki.brekeke.com/wiki/Brekeke-SIP-Server-Failure-Notification
In your case, if Tenor is down then the notification mail will be sent to you. |
|
Back to top |
|
noiptel Brekeke Talented
Joined: 22 Feb 2010 Posts: 68
Location: USA
|
Posted: Wed Jun 16, 2010 3:23 pm Post subject: |
|
|
We currently have the Standard Edition.
The Failure Notification feature will be great to have. However, we would like to have Failure Notification historical data, availability to reports and performance graphs.
How can we go about doing this? |
|
Back to top |
|
taitan Brekeke Master Guru
Joined: 15 Mar 2008 Posts: 237
|
Posted: Thu Jun 17, 2010 11:54 am Post subject: |
|
|
The Failure Notification feature can monitor any SIP device even if the device's IP address is a dynamic because it can use a device's REGISTER IP address.
With the Failure Notification, the SIP Server sends a notification mail to you if the SIP device is down. It means you can keep these mails as historical data.
You can ask Brekeke's sales team to provide an evaluation license of Advanced Edition. |
|
Back to top |
|
noiptel Brekeke Talented
Joined: 22 Feb 2010 Posts: 68
Location: USA
|
Posted: Thu Jun 17, 2010 4:02 pm Post subject: |
|
|
We upgraded to the Advance Edition.
I have added some remote Tenor Endpoints to the Heartbeat page.
However, only if I put in the current IP address of the tenor the feature works well. The problem is that all the IP addresses for the for remote tenors are dynamic. I suppose once the IP address changes we will get a false failure e-mail notification.
What should I put in the SIP URI field so that the heartbeat feature work for us? |
|
Back to top |
|
taitan Brekeke Master Guru
Joined: 15 Mar 2008 Posts: 237
|
Posted: Mon Jun 21, 2010 2:22 pm Post subject: |
|
|
OK..
>> What should I put in the SIP URI field so that the heartbeat feature work for us?
Are Tenor Endpoints registered in the SIP Server? right?
If so, set "sip:username@localhost" in [SIP URI]. (username should be Tenor's registered name...)
and set "404" in [Response Codes]. |
|
Back to top |
|
noiptel Brekeke Talented
Joined: 22 Feb 2010 Posts: 68
Location: USA
|
Posted: Mon Jun 21, 2010 3:34 pm Post subject: |
|
|
The below Endpoint Tenor is registered in the "Registered Clients" as follows:
User
im5q1
Contact URI
sip:im5q1@192.168.1.60:5106
Detail
Expires : 300
Priority : 1000
User Agent : Quintum/1.0.0 SN/0030E1030BD4 SW/P107-09-00
Requester : 189.147.171.101:5106
Time Update : Mon Jun 21 17:23:58 CDT 2010
Heartbeat settings:
Heartbeat 1
Heartbeat Monitoring Method: SIP
SIP URI: sip:im5q1@192.168.1.60:5106
Interval: 30
Response Codes: 404
Please confirm what I am doing wrong as I am still getting a Failure. |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Tue Jun 22, 2010 10:16 am Post subject: |
|
|
i think Taitan said to set sip:username@localhost in [SIP URI]. it is "sip:im5q1@localhost" |
|
Back to top |
|
taitan Brekeke Master Guru
Joined: 15 Mar 2008 Posts: 237
|
Posted: Tue Jun 22, 2010 2:53 pm Post subject: |
|
|
Yes.. right. |
|
Back to top |
|
noiptel Brekeke Talented
Joined: 22 Feb 2010 Posts: 68
Location: USA
|
Posted: Wed Jun 23, 2010 6:43 am Post subject: |
|
|
Thanks for your response, but unfortunately is still not working I have tried the following settings for SIP URI and they all go immediately to "Failed", the only way it works is configuring heartbeat as NETWORK and putting the public IP of the UA, but this is not desirable because the IP changes
sip:im5q1@localhost
sip:im5q1@<IP of the server>
sip:im5q1
sip:im5q1@
im5q1
sip:im5q1@192.168.1.60:5106
sip:im5q1@192.168.1.60
sip:im5q1@<public IP of the UA>
im5q1@<public IP of the UA>
What could be wrong ? |
|
Back to top |
|
noiptel Brekeke Talented
Joined: 22 Feb 2010 Posts: 68
Location: USA
|
Posted: Tue Jun 29, 2010 7:36 pm Post subject: |
|
|
We will appreciate your asssitance with this matter.
Thanks. |
|
Back to top |
|
taitan Brekeke Master Guru
Joined: 15 Mar 2008 Posts: 237
|
Posted: Tue Jun 29, 2010 7:52 pm Post subject: |
|
|
Hi
If UA is registered as the username "im5q1", set "sip:im5q1@localhost" at [SIP URI] field.
Are you sure "im5q1" is registered in the SIP Server? |
|
Back to top |
|
noiptel Brekeke Talented
Joined: 22 Feb 2010 Posts: 68
Location: USA
|
Posted: Wed Jun 30, 2010 5:05 am Post subject: |
|
|
I have copy and paste the information reflected on the "Registered Clients" screen.
User
im5q1
Contact URI
sip:im5q1@192.168.1.60:5106
Detail
Expires : 300
Priority : 1000
User Agent : Quintum/1.0.0 SN/0030E1030BD4 SW/P107-09-00
Requester : 189.147.148.91:5106
Time Update : Wed Jun 30 06:59:18 CDT 2010 |
|
Back to top |
|
noiptel Brekeke Talented
Joined: 22 Feb 2010 Posts: 68
Location: USA
|
Posted: Wed Jun 30, 2010 8:47 am Post subject: |
|
|
Please find below the call log generated when running Heartbeat 1.
java.net.SocketTimeoutException: Receive timed out
at java.net.PlainDatagramSocketImpl.receive0(Native Method)
at java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java:136)
at java.net.DatagramSocket.receive(DatagramSocket.java:712)
at com.brekeke.net.sip.common.SIPpacketInvoke.invoke(Unknown Source)
at com.brekeke.siptool.haman.HeartbeatSIP.sendPacket(Unknown Source)
at com.brekeke.siptool.haman.HeartbeatSIP.run(Unknown Source)
at java.lang.Thread.run(Thread.java:619)
null(2) is down!!
Email sent to:noc@noiptel.com |
|
Back to top |
|
taitan Brekeke Master Guru
Joined: 15 Mar 2008 Posts: 237
|
Posted: Thu Jul 01, 2010 12:18 pm Post subject: |
|
|
Do you get the "Failed" even if the "im5q1" is registered?
Can you make a call to "im5q1" from another SIP account? |
|
Back to top |
|
noiptel Brekeke Talented
Joined: 22 Feb 2010 Posts: 68
Location: USA
|
Posted: Fri Jul 02, 2010 5:16 am Post subject: |
|
|
Yes, the UA is registered and has normal calls on it. The failed event shows as soon as we start the heartbeat, That is why I suspect heartbeat is not working rigth. Is there a pre-requisite for it ? We are currently running Java DB 10.4.2.1. |
|
Back to top |
|
taitan Brekeke Master Guru
Joined: 15 Mar 2008 Posts: 237
|
Posted: Fri Jul 02, 2010 3:38 pm Post subject: |
|
|
Ok..
Remove "404" from [Response Codes] and keep it blank. |
|
Back to top |
|
noiptel Brekeke Talented
Joined: 22 Feb 2010 Posts: 68
Location: USA
|
Posted: Fri Jul 02, 2010 4:37 pm Post subject: |
|
|
404 removed. We still get the immediate "Failed" status. |
|
Back to top |
|
taitan Brekeke Master Guru
Joined: 15 Mar 2008 Posts: 237
|
Posted: Tue Jul 06, 2010 1:25 pm Post subject: |
|
|
Do you have any other device instead of Quintum Tenor?
Try your Heartbeat settings with another device..
I want to know if the issue happens only with the Quintum..
Also, can you capture packet at server PC with wireshark?? |
|
Back to top |
|
|