Author |
Message |
juanmanuel Brekeke Guru
Joined: 04 Mar 2009 Posts: 107
Location: Medellin,Colombia
|
Posted: Sat Jun 12, 2010 8:12 am Post subject: Trunk to Trunk Calls |
|
|
1. Brekeke Product Name and version:PBX 2.4.4.8
2. Java version:
3. OS type and the version:Windos
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
I need to make trunk to trunk calls, I mean:
I have two Brekeke PBX two diferentes sites.
I need from one UA of the PBX A make a call to PBX B so the call go out to a SIP trunk connected to my ITSP of the site B, also knowed as Trunk To Trunk Calls.
It is possible, If yes, how can I to do that?
Example:
Site A has the extension 120, from extension 120 I need make one external call so this call go out thru the ITSP trunk of site B that has the outgoing prefix setting as 0.
Best Regards
Juan Acevedo _________________ Juan Manuel Acevedo
Medellin, Colombia
email:jacevedo@e-global.com.co |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Mon Jun 14, 2010 11:37 am Post subject: |
|
|
servers with PBX A and B can only go through ITSP to reach each other?
If not, you can make calls between pbx servers without going through ITSP. |
|
Back to top |
|
juanmanuel Brekeke Guru
Joined: 04 Mar 2009 Posts: 107
Location: Medellin,Colombia
|
Posted: Mon Jun 14, 2010 1:06 pm Post subject: |
|
|
Thanks:
I fact I don't make calls between PBXA y PBX B using the ITSP
My interest is to make a call from one extension af PBXA to go out the ITSP connected to PBXB _________________ Juan Manuel Acevedo
Medellin, Colombia
email:jacevedo@e-global.com.co |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Mon Jun 14, 2010 1:39 pm Post subject: |
|
|
have you tried with setting up an ARS pattern-out at pbx A to send call to ITSP address when dial ing numbe is prefix 0 + DID, which is pointed to PBX B address by ITSP?
can the call be established?
what error is sent from itsp to pbx A? |
|
Back to top |
|
|