Author |
Message |
chantasaro Brekeke Junior Member
Joined: 12 Mar 2009 Posts: 8
Location: Thailand
|
Posted: Thu Mar 25, 2010 3:12 am Post subject: Brekeke PBX Trunk to Brekeke PBX |
|
|
1. Brekeke Product Name and version:2.4.3.9
2. Java version:
3. OS type and the version: Windows 2003
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
How to connect between Brekeke PBX to Brekeke PBX for client can call from PBX1 to PBX2 |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Thu Mar 25, 2010 2:23 pm Post subject: |
|
|
for user at pbx1 call to pbx2
at pbx1 use ARS to register pbx1 as a user to pbx2 and create pattern-out to send call to pbx2 ip address if dialing numbers a certain prefix or pattern
for setup ars on pbx 1, copy the sample ARS rule for ITSP at pbx/ARS/settings
and do the same setup at pbx2 for calls from pbx2 users to pbx1 |
|
Back to top |
|
chantasaro Brekeke Junior Member
Joined: 12 Mar 2009 Posts: 8
Location: Thailand
|
Posted: Mon Mar 29, 2010 10:43 pm Post subject: |
|
|
I try to configure but not work.
Step 1 ==> In PBX2 Create SIP Account for PBX1.
Step 2 ==> In PBX1 Create ARP to register PBX2.
Step 3 ==> Creat pattern-out to send call to PBX2. |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Tue Mar 30, 2010 10:50 am Post subject: |
|
|
can you see pbx1 register record at pbx2/sip server/registered clients?
at pbx2, create pbx user with the same name as pbx1 regisetered id
at pbx1/ ars/pattern-out, set
pattern-out add the following setting
matching pattern
From: sip:pbx1_registerID@pbx2_IP
if not work, please capture packets and pbx1 or pbx2
and check what response from pbx2 |
|
Back to top |
|
|