Brekeke PBX and OCS Med on same server

[krenzjer]

1. Brekeke Product Name and version:2.4.3

2. Java version:
JRE 6

3. OS type and the version:
Windows 2008 x64

4. UA (phone), gateway or other hardware/software involved:
X-Lite and Aastra 55i

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :1

6. Your problem:
Trying to get PBX and OCS working on same server. Server has 2 network card (1) Gateway 192.168.0.6)(2) General 192.168.0.5 internal for ocs, 192.168.0.9 for web, and 192.168.0.17 for Brekeke) Set bind for the Brekeke ip, and restrict for everything but 17. If I skip the bind I can make calls but OCS Med will not start. If I leave it in then all 3 start(sip, pbx, ocs) , but I get a 603 from both phones. This is a evaluation with no changes as of yet. Any help would be appreciated.

Thanks,

Jeremy

[james]

can you use unique port number at OCS?

[james]

also, paste your DialPlan rules here.
I want to look at them.

[krenzjer]

Well I finally got it installed and working on the PBX side. I had to adjust the rules in the dialplan the had $target=localhost:1506X to $target=192.168.0.17:1506X, still trying to get ocs tied in. What order do i need to place the rules for OCS in the dial plan? Also is there a how to on getting exchange VM and AutoAttendant integrated.

Thanks for all the help

Jeremy

[james]

hey.. can you write your all of Dialplan rules here?
did you specify the correct OCS's interface address at the DialPlan?

[krenzjer]

##
## DialPlan table file "C:/Program Files (x86)/Brekeke/pbx/webapps/pbx/WEB-INF/work/sv/etc/dialplan.tbl" (Wed Feb 10 15:24:46 EST 2010)
##
"PBX Prefix", $port="^15062";$localhost="^true";$request="^INVITE";To="(^.*sip:)pbx(.+\$)";, To="%1%2";$target="192.168.0.17:15060";$auth="false";X-PBX-Param="", ""
"From PBX Page", $port="^15062";$localhost="^true";$request="^INVITE";X-PBX-Param="page";$page.header="(.+)\,(.+)";, $auth="false";&net.sip.hide.loopback="true";$b2bua="false";%1="%2";X-PBX-Param="";&net.sip.fixed.addrport.uas="true", ""
"From PBX 1", $port="^15062";$localhost="^true";$request="^INVITE";$outbound="^true";, $auth="false";&net.sip.hide.loopback="true";$b2bua="true";X-PBX-Param="", ""
"From PBX 2", $port="^15062";$localhost="^true";$request="^INVITE";, $auth="false";&net.sip.hide.loopback="true";$b2bua="false";X-PBX-Param="";&net.sip.fixed.addrport.uas="true", ""
"To PBX From ITSP", $request="^INVITE";$regaddr="(.+):15060";$localhost("%1")="^true";, $target="192.168.0.17:15060";$transport="udp";$b2bua="true";$auth="false", ""
"From OCS to PBX", _disabled="true";$addr="192.168.0.5";$request="^INVITE";$getUri( From )="sip:(.+)@(.+)";$getUri( To )="sip:\\+(.+)";, $target="192.168.0.17:15060";$transport="UDP";$auth="false";&net.sip.transport.follow.request="true";From="sip:%1_ocs@%2";To="sip:%3", ""
"From PBX to OCS", _disabled="true";$port="15062";$localhost="true";$registered="false";$outbound="false";$request="^INVITE";$getUri( From )="!_ocs";To="sip:(.+)@";, $transport="TCP";$auth="false";&net.sip.transport.follow.request="true";To="sip:+%1@192.168.0.6", ""
"From PBX from OCS", _disabled="true";$port="15062";$localhost="^true";$request="^INVITE";$getUri( From )="sip:(.+)_ocs@(.+)";, $replaceuri="true";$continue="true";From="sip:%1@%2", ""
"To PBX", $request="^INVITE";$registeredsender="^true";, $target="192.168.0.17:15060";$transport="udp";$b2bua="false";$auth="false";$auth="false";&net.sip.fixed.addrport.uac="true", ""
"To PBX auth", $request="^INVITE";, $target="192.168.0.17:15060";$transport="udp";$b2bua="false";$auth="true";&net.sip.fixed.addrport.uac="true", ""
"Subscribe", $request="^SUBSCRIBE";Event="^x-.*|^message-summary\$|^dialog\$|^line-seize\$|^presence\$|^call-info\$";, $target="192.168.0.17:15062";$transport="udp";$auth="false", ""
"Thru Register", $port="^15060";$localhost="^true";$request="^REGISTER";, $action="register";$auth="false";&net.registrar.onlyglobal="true", ""
"Register for PAL", $request="^REGISTER";$pal.register="^true";, $continue="true", ""
"Register Behind NAT", _disabled="true";$request="^REGISTER";, $continue="true";&register.contact.remote="true";&_register.contact.nat="true";&_net.registrar.adjust.expires="10", ""
"{no authorization}", $request="^REGISTER";$localhost="true";user-agent="^Brekeke";, $action=register;$auth=false;&net.registrar.upper.allow=false, ""

[james]

>> What order do i need to place the rules for OCS in the dial plan?

Follow the sample's order http://wiki.brekeke.com/wiki/Configure-Brekeke-PBX-for-OCS.
It seems your DialPlan order is OK.


>> Also is there a how to on getting exchange VM and AutoAttendant integrated.

You need to create users in the PBX.