no accounting messages when multiple domains are created

[martins]

1. Brekeke Product Name and version:
Brekeke Sip-Server 2.3.8.4/286

2. Java version:
1.6.0_17

3. OS type and the version:
Windows 2003

4. UA (phone), gateway or other hardware/software involved:
X-lite

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
pattern 8

6. Your problem:
I have enabled Radius accounting by adding the following line in the dialplan:
$request=^INVITE
$session=com.sample.radius.proxy.RadiusAcct
$continue=true

Accounting messages are send to radius server.

But when I create multiple domains and set the SIP-server in multiepl domain mode no accounting messages are send anymore to the radius server. How can we have radius accounting messages for multiple domains?

[james]

Enable Authentication at [Domains] page with each domain.

There are "REGISTER" and "INVITE" under domain's [Authentication] settings.

[martins]

I enabled "REGISTER: ON" and "INVITE: ON" already. Actually there is no accounting info at all anymore with multiple domains. Even not from the default domain name at -> Configuration -> SIP -> Realm, which works fine but 1 domain.

[james]

Do you have any other DialPlan rules before the above rule?
Because .. I suppose there is another rule which causes the problem..

Can you paste all of DialPlan rules here?