Author |
Message |
booshanrao Brekeke Junior Member
Joined: 21 Jan 2010 Posts: 5
Location: Hyderabad
|
Posted: Thu Jan 21, 2010 1:59 am Post subject: Cisco 7940 configuration |
|
|
1. Brekeke Product Name and version:Brekeke PBX, Version 2.4.3.0
2. Java version:
3. OS type and the version:windows 2003 server
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:Even configured all user details in CISCO 7940 it is not registering.Can any one helps me out with configuration. _________________ Shashi
EasyTel-Hyd-India |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Thu Jan 21, 2010 4:06 pm Post subject: |
|
|
is the authentication for REGISTER and INVITE set on at pbx/sip server/configuration/sip
if yes, check the setting at step 3, 4 and 5 for configuration at sip server and phone side at link below
http://www.brekeke.com/products/products_sip_quickstart_simple.php
after phone register successfully, you need to create users at pbx/users for each phone, pbx user name is the same as phone ID. |
|
Back to top |
|
booshanrao Brekeke Junior Member
Joined: 21 Jan 2010 Posts: 5
Location: Hyderabad
|
Posted: Fri Jan 22, 2010 8:37 pm Post subject: cisco 7940 |
|
|
Hi Brekeke Guru,
As i added in the forum, not registering with cisco 7940.
Now tried with configuring back up proxy server then it started working.
Thank you,
Regards,
Shashi _________________ Shashi
EasyTel-Hyd-India |
|
Back to top |
|
|