Brekeke Configuration

[masnaa]

1. Brekeke Product Name and version:


Brekeke SIP Server , Version 2.1.6.6 Standard

2. Java version:
(build 1.6.0_06-b02)

3. OS type and the version:
Server 2003 R2 Standard -32bit

4. UA (phone), gateway or other hardware/software involved:
Xlite and Eyebeam

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
Pattern #3. All ports are defaults, and forwarded thru firewall.
Only external IP is entered: xxx.xxx.xxx.xxx

6. Your problem:
Only Lan Xlite can register.
Registeration thru WAN fails with Too Many Hops or Request Timed Out.
I can see the packets hit our SIP server but then bounce back and forth from our WAN IP.

[janP]

Set the global side IP address as the interface at the settings of Brekeke SIP Server.

Refer this http://wiki.brekeke.com/wiki/Set-port-forwarding