Author |
Message |
al.thewizard Brekeke Junior Member
Joined: 20 Aug 2009 Posts: 8
|
Posted: Thu Aug 20, 2009 7:20 am Post subject: Using ARS rules without having PBX user defined/registered |
|
|
1. Brekeke Product Name and version: PBX 2.3.6.0 Pro
2. Java version: 1.6.0_11
3. OS type and the version: Linux SuSE SLES 9 SP1 (2.6.12.46-0.12)
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem: I want to use the ARS feature to route the calls coming from and going to sip phone NOT registered in the PBX.
How can I have to define the ARS rules and Dial Plan rules to achieve this ? Or if I want to use ARS do I have to have a user defined in the PBX ? |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
|
Back to top |
|
al.thewizard Brekeke Junior Member
Joined: 20 Aug 2009 Posts: 8
|
Posted: Thu Aug 20, 2009 11:55 pm Post subject: |
|
|
thanks hope,
can you send me an example of the needed configuration to use ARS rules without having a PBX user. |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Fri Aug 21, 2009 10:28 am Post subject: |
|
|
if sip server/configuration/sip/authentication Invite is set ON,
you need to create user authentication account at sip server/User authentication and set the same auth user and password at phone side.
if client cannot handle invite authentication, then the following dialplan is needed
Matching Patterns | $request = ^INVITE $addr = VoIP_device_IP
| Deploy Patterns | $auth = false $target = localhost:15060
|
At pbx/ARS, create an empty ARS pattern-in by just clicking new buton, to accept all calls no matter if it is pbx user
and create ARS pattern-out to route the call to destination, like
[Matching Patterns]
To: sip:9(.+)@
User: empty
[Deploy Patterns]
To; sip:$1@detination_ip |
|
Back to top |
|
al.thewizard Brekeke Junior Member
Joined: 20 Aug 2009 Posts: 8
|
Posted: Wed Aug 26, 2009 3:41 am Post subject: |
|
|
Thanks hope, it works perfectly. |
|
Back to top |
|
|