Brekeke Forum Index » Brekeke PBX Forum

Post new topic   Reply to topic
Audio Codes MP-104 Disconnect issue
Author Message
superpizza
Brekeke Newbie


Joined: 20 Jul 2009
Posts: 1

PostPosted: Mon Jul 20, 2009 12:57 pm    Post subject: Audio Codes MP-104 Disconnect issue Reply with quote

1. Brekeke Product Name and version: i belive that its a MP-104 problem

2. Java version:

3. OS type and the version: Windows

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem:

when some one answers the call that i make it disconnects right away, i have disabled call answer detection , disconnect on busy tone and all other items that ask the device to make a dissconect. i went and made a telnet log and i see that the device picks up #0:LINE_DISCONNECT_DETECTED_EVNOTIC: . i am tring a way to disable this, i have spent four days and no success. please assist.
thank you
log is attached below, the disconnection starts at the 1529 mark in the log.


NOTIC:( sip_stack)(1508 ) UdpRtxMngr::Remove 200 Response 102 INVITENO
TIC:( lgr_flow)(1509 ) | |(SIPTU#0)ACK State:LocalAccepted(1dbb
673828df0a7b0a75d1b50e1abec2@192.168.0.71)NOTIC:( sip_stack)(1510 ) SI
PCall(#0) changes state from LocalAccepted to ConnectedNOTIC:( lgr_flow)(15
11 ) | | |
NOTIC:( lgr_psbrdex)(1528 ) recv <-- EV_ANALOG_IF_LINE_DISCONNECTED Ch:0
NOTIC:( lgr_flow)(1529 ) #0:LINE_DISCONNECT_DETECTED_EVNOTIC:( l
gr_flow)(1530 ) | #0:LINE_DISCONNECT_DETECTED_EVNOTIC:( lgr_psbrdi
f)(1531 ) #0:StopRTP_RTCP on channel 0NOTIC:( lgr_psbrdif)(1532 )
Turn ringer OFF for channel 0NOTIC:( lgr_flow)(1533 ) | #0:FXO
Release Line NOTIC:( lgr_psbrdif)(1534 ) #0:PSOSBoardInterface::StopPlay
Tone- CalledNOTIC:( lgr_flow)(1535 ) | #0:RELEASE (send) GWAPP_
NORMAL_CALL_CLEAR : (1dbb673828df0a7b0a75d1b50e1abec2@192.168.0.71)NOTIC:(
lgr_flow)(1536 ) | | #0:RELEASE:(1dbb673828df0a7b0a75d1b50e1ab
ec2@192.168.0.71)NOTIC:|CALL_END |0 |0 |-1 |0 |0 |1
|FXO |IP |192.168.0.71 |192.168.0.73 |0 |0 |Unknown
|Unknown |0 |0 |411 |411
|5 |g711Ulaw64k |20 |192.168.0.71
L_CALL_CLEAR |0 |240 |267 |0 |1dbb673828d
f0a7b0a75d1b50e1abec2@192.168.0.71 | |
| |0
|0 |0 |0 | -001 |0 |0 |

NOTIC:( lgr_flow)(1538 ) | | #0:RELEASE_ACK:(1dbb673828df
0a7b0a75d1b50e1abec2@192.168.0.71)NOTIC:( lgr_flow)(1539 ) | |
| #0:RELEASE(1dbb673828df0a7b0a75d1b50e1abec2
lgr_flow)(1540 ) | |(SIPTU#0)DISCONNECT_REQ State:Connected(1dbb
673828df0a7b0a75d1b50e1abec2@192.168.0.71)NOTIC:( lgr_flow)(1541 ) --
-- Outgoing SIP Message to 192.168.0.71:5060 ----NOTIC:BYE sip:Unknown@192.168.0
.71 SIP/2.0
Via: SIP/2.0/UDP 192.168.0.73;branch=z9hG4bKac549073602
Max-Forwards: 70
Back to top
View user's profile
hope
Brekeke Master Guru


Joined: 15 Jan 2008
Posts: 862

PostPosted: Tue Jul 21, 2009 11:15 am    Post subject: Reply with quote

Did you follow the settings at
http://wiki.brekeke.com/wiki/AudioCodes-MP-104
and
http://wiki.brekeke.com/wiki/Disconnected-when-callee-answers
Back to top
View user's profile
Display posts from previous:   
Post new topic   Reply to topic    Brekeke Forum Index » Brekeke PBX Forum All times are GMT - 7 Hours
Page 1 of 1