Author |
Message |
jaldulaimi Brekeke Member
Joined: 30 Mar 2008 Posts: 17
Location: Sydney
|
Posted: Fri Jun 19, 2009 6:04 am Post subject: DID, what I'm doing wrong? |
|
|
1. Brekeke Product Name and version:2.3.6.0
2. Java version: 4.1.31
3. OS type and the version: Fedora 8
4. UA (phone), gateway or other hardware/software involved: Linksys PAP2
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : Pattern 4
6. Your problem: Make call from a pstn--------->CiscoGW--------->SIP server-------->my sip phone. Cisco GW, been configured to use DID, and I can trace my call going to the right dial-peer, but always get a busy signal. Below, are my dial-peers and sip dial plan, any idea why this not working? Any help greatly appreciated.
Let's assume the following:
974444444 is my DID,
215.8.160.20 is my Cisco GW
215.8.163.17 is my sip server IP
dial-peer voice 1 pots
incoming called-number 974444444
direct-inward-dial
dial-peer voice 3 voip
destination-pattern 974444444
session target ipv4:215.8.160.17
Matching Patterns | $request = ^INVITE $addr = 215\.8\.160\.20 To = sip:97444444@
|
Deploy Patterns | $auth = off To = sip:974444444@
|
|
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Fri Jun 19, 2009 10:11 am Post subject: |
|
|
how about using the dialplan like
Matching Patterns | $request = ^INVITE To = sip:97444444@
|
Deploy Patterns | $auth = off To = sip:974444444@
|
|
|
Back to top |
|
jaldulaimi Brekeke Member
Joined: 30 Mar 2008 Posts: 17
Location: Sydney
|
Posted: Sat Jun 20, 2009 7:04 am Post subject: |
|
|
Can I ask?
What's the difference between my dial plan and yours?
Many thanks for your help...
Jassem |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Mon Jun 22, 2009 10:39 am Post subject: |
|
|
$addr returns the source IP address of the INVITE packets, it is the DID provider's IP not the gw.
If check the INVITE packets from gw, use $geturi(From) = sip:(.+)@215.8.160.20 or From = sip:(.+)@215.8.160.20
there are more explanation at http://www.brekeke-sip.com/download/bss/bss_admin_en.pdf |
|
Back to top |
|
|