Brekeke and Mediapack

pel-ee · Posted: Wed Jun 17, 2009 7:12 am Post subject: Brekeke and Mediapack

1. Brekeke Product Name and version: Brekeke PBX, Version 2.3.6.0 , Pro

2. Java version:

3. OS type and the version: Ubuntu

4. UA (phone), gateway or other hardware/software involved:
Audiocodes Mediapack 118

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : pattern 2

6. Your problem:

Hello.
I have a problem.
I need to connect Brekeke PBX with Audiocodes Mediapack 118 FXS, but I have no positive results.
I try to do all settings according to http://wiki.brekeke.com/wiki/Interoperability:VoIP_SIP_Gateways:AudioCodes_MP-114(FXO/FXS). Calls pass only from FXS port of MP to IP phones. Calls from IP phones to MP does not pass (error 404).
What can you advice to solve this problem?

hope · Brekeke Master Guru Joined: 15 Jan 2008 Posts: 862

capture the packets and check if the call is sent to your gateway, and who return 404.

Haddas · Brekeke Guru Joined: 17 Jan 2008 Posts: 170

Hi
Can you make a phone call between IP phones without 404 error??

pel-ee · Posted: Mon Jun 22, 2009 6:05 am Post subject:

Hi,

Has anybody setup brekeke with Audiocodes Mediapac-118?
The settings that are listed in Brekeke-wikipedia are not working (http://wiki.brekeke.com/wiki/Interoperability:VoIP_SIP_Gateways:AudioCodes_MP-114(FXO/FXS)).
When an incoming call brekeka gives error 486, although the phone all good - within the network calls are working correctly.

hope · Brekeke Master Guru Joined: 15 Jan 2008 Posts: 862

create a dialplan like below and put it between "From PBX.." dialplan and "To PBX..." dial plan

Matching Patterns

$request = ^INVITE
From = sip: (.+)@gwIP

Deploy Patterns

$target = 127.0.0.1:15060
$auth = false

and then create an ARS like

patten-IN

matching patterns:
From: sip:(.+)@gatewayIP
To: sip:(.+)@

deploy patterns;
To:$1