Author |
Message |
teo_teo Brekeke Junior Member
![](images/spacer.gif)
Joined: 04 Mar 2009 Posts: 5
|
Posted: Wed Mar 04, 2009 4:31 am Post subject: Port Allocation failed 486 |
|
|
1. Brekeke Product Name and version:
Brekeke PBX, Version 2.2.6.2 , Pro
2. Java version:
1.6.0_11
3. OS type and the version:
linux 2.6.18-92.el5
4. UA (phone), gateway or other hardware/software involved:
LinkSYS SPA922
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
Today i started receing the following error
Port Allocation failed 486.
As soon i restarted the server it was gone. What exactly this message mean?Will it appear again? As i was maiking a call, the other party when answeared the call, i was getting this error and call ended send by pbx. |
|
Back to top |
|
hope Brekeke Master Guru
![](images/spacer.gif)
Joined: 15 Jan 2008 Posts: 862
|
Posted: Thu Mar 05, 2009 11:16 am Post subject: |
|
|
where was "Port Allocation failed 486." shown?
on the phone LCD?
Did you set "SIP port" under the ext on the phone? |
|
Back to top |
|
teo_teo Brekeke Junior Member
![](images/spacer.gif)
Joined: 04 Mar 2009 Posts: 5
|
Posted: Thu Mar 05, 2009 11:26 am Post subject: |
|
|
Port Allocation failed 486 was shown on PBX call logs.
Nothing was shown under the ext on the phone, just call ended. |
|
Back to top |
|
Harold Brekeke Master Guru
![](images/spacer.gif)
Joined: 21 Sep 2008 Posts: 287
Location: Japan
|
Posted: Sun Mar 08, 2009 12:17 am Post subject: |
|
|
Hi
I think you need to expand the range of RTP port in the SIP Server.
Refer the RTP port settings in the SIP Server document. |
|
Back to top |
|
teo_teo Brekeke Junior Member
![](images/spacer.gif)
Joined: 04 Mar 2009 Posts: 5
|
Posted: Mon Mar 09, 2009 12:14 am Post subject: Port Allocation failed 486 |
|
|
Thank u for your reply,
The number of RTP port range is already far bigger than number of users. Also after I rebooted linux , i did not experience this again and when it happend, 7 out of 10 calls had this type of Port Allocation failed 486 error. I dont know what to say. I will change it and see if happens again. |
|
Back to top |
|
Harold Brekeke Master Guru
![](images/spacer.gif)
Joined: 21 Sep 2008 Posts: 287
Location: Japan
|
Posted: Tue Mar 10, 2009 1:34 am Post subject: |
|
|
Hi
Are you using RTP-Relay at the SIP Server? Let you set it to "auto".
How many concurrent calls?
Are there any VIDEO calls?
What kind of SIP client are users using? |
|
Back to top |
|
teo_teo Brekeke Junior Member
![](images/spacer.gif)
Joined: 04 Mar 2009 Posts: 5
|
Posted: Wed Mar 11, 2009 10:48 am Post subject: |
|
|
Thank u for your reply,
RTP-Relay is ON.
How many concurrent calls?
Max 12 calls
Are there any VIDEO calls?
No,
What kind of SIP client are users using
Linksys IP IPHONE spa922,SPA942 |
|
Back to top |
|
Harold Brekeke Master Guru
![](images/spacer.gif)
Joined: 21 Sep 2008 Posts: 287
Location: Japan
|
Posted: Fri Mar 13, 2009 6:33 pm Post subject: |
|
|
Hi
Which port range are you using for RTP at the SIP Server?
If you disable RTP-Relay, does the issue happen still? |
|
Back to top |
|
teo_teo Brekeke Junior Member
![](images/spacer.gif)
Joined: 04 Mar 2009 Posts: 5
|
Posted: Thu Mar 19, 2009 5:07 am Post subject: Port Allocation failed 486 |
|
|
Hi,
Which port range are you using for RTP at the SIP Server?
10000-10999
If you disable RTP-Relay, does the issue happen still?
As i said only one time this problem happened and It would be very
helpful if I knew if it was PBX problem or maybe Linux.
Because server is in production mode when It is possible I will try it.
Thanks |
|
Back to top |
|
Harold Brekeke Master Guru
![](images/spacer.gif)
Joined: 21 Sep 2008 Posts: 287
Location: Japan
|
Posted: Sat Mar 21, 2009 1:27 am Post subject: |
|
|
teo_teo
Do you still experience the same problem?
I don't know the problem is related with PBX or Linux.
But I've never experienced such a problem from my PBX on CentOS.
Which Linux distribution are you using? |
|
Back to top |
|
|