Calls from Brekeke to Terminating Gateway

vvenegas

1. Brekeke Product Name and version: Brekeke PBX 2

2. Java version: last version

3. OS type and the version: XP SP3

4. UA (phone), gateway or other hardware/software involved: QUINTUM AFM200

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 8

6. Your problem: please help me to the following connection:

1.- i have a Quintum gateway registered with a voip carrier.

2.- i have a Brekeke PBX with registered users

i have made an ARS so a user can make a call through the Quintum terminating gateway but when the user makes the call, it appears on screen, proxy authentication required.

i don`t know how to send the voip traffic from Brekeke users to the terminating gateway if that gateway is registered with a voip carrier.
how can i register the Quintum to Brekeke and Voip carrier at the same time?

Brekeke PBX and Terminating gateway has Public IP address.

thanks a lot for your help.

tuie2 · Brekeke Talented Joined: 23 Jan 2009 Posts: 57

> it appears on screen, proxy authentication required.

Where did you see the above message?

vvenegas · Posted: Thu Mar 26, 2009 4:48 pm Post subject:

tuie2 · Brekeke Talented Joined: 23 Jan 2009 Posts: 57

Can X-Lite make a call to other users instead of the terminating gateway?

If you are using INVITE Authentication at Brekeke SIP Server, you should make a user account at the server, and set the same account at X-Lite.

vvenegas · Posted: Mon Mar 30, 2009 10:16 am Post subject:

tuie2 · Brekeke Talented Joined: 23 Jan 2009 Posts: 57

It seems you didn't set the ARS correctly because you can make a call between clients but you can not make an outbound call.

Set the VoIP carrier's password in the ARS.