Author |
Message |
jst9943 Brekeke Junior Member
Joined: 10 Nov 2008 Posts: 6
Location: USA
|
Posted: Mon Dec 08, 2008 3:18 pm Post subject: dial plan from pbxnsip server |
|
|
1. Brekeke Product Name and version: 2.2.1.6
2. Java version: version 4
3. OS type and the version: windows server 2003
4. UA (phone), gateway or other hardware/software involved: softphone , ip pabx
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem: I would like to setup calls from ip pabx server, pbxnsip to ua in the sip server. How can I set the dial plan to call ua in the sip server. I have set the following
Matching Patterns | $request = ^invite $registered = false $addr = 146\.82\.219\.20
|
Deploy Patterns | TO = sip:3%1@
|
The deploy pattern is for all ua in the sipserver. Am I doing the dialplan correctly? where I want that calls from a non registered ua in the pbx to ua registered in the sipserver. Using this dial plan I get a 407 error on my call log. |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Tue Dec 09, 2008 12:07 pm Post subject: |
|
|
Does the dialplan miss something?
Matching Patterns | $request = ^INVITE
$registered=false
$addr=146\.82\.219\.20
To=sip:(.+)@ |
Deploy Patterns | To = sip:3%1@
|
Quote: |
Using this dial plan I get a 407 error on my call log. |
is the Authentication Invite set ON at Sip Server?
Turn authentication off or set User Authentication |
|
Back to top |
|
jst9943 Brekeke Junior Member
Joined: 10 Nov 2008 Posts: 6
Location: USA
|
Posted: Tue Dec 09, 2008 5:52 pm Post subject: dial plan from pbxnsip server |
|
|
Did the changes but still did not work. What I would like to accomplished is to have a dial plan on the sip server that will accept an incoming call from another server that is not registered. In this dialplan, once the sipserver received a call from the other server it will route the call to the ua in the sip server based on the number sent by the other server. |
|
Back to top |
|
lakeview Brekeke Master Guru
Joined: 15 Nov 2007 Posts: 319
Location: Florida
|
Posted: Wed Dec 17, 2008 11:34 am Post subject: |
|
|
Hi jst9943,
If a UA in the SIP Server is registered, you don't have to use any DialPlan rules.
So delete the DialPlan and try to make a call from pbxnsip .
I wonder.. why do you want to use pbxnsip? |
|
Back to top |
|
jst9943 Brekeke Junior Member
Joined: 10 Nov 2008 Posts: 6
Location: USA
|
Posted: Wed Dec 17, 2008 4:30 pm Post subject: dial plan from pbxnsip server |
|
|
lakeview wrote: |
Hi jst9943,
If a UA in the SIP Server is registered, you don't have to use any DialPlan rules.
So delete the DialPlan and try to make a call from pbxnsip .
I wonder.. why do you want to use pbxnsip? |
HI, thank you for your reply. I would like to have user in pbxnsip to call user in the brekeke sip server and vise versa. Right now, I can have brekeke user call any ua that is register in pbxnsip but ua from pbxnsip to brekeke ua gets a 407 error. |
|
Back to top |
|
lakeview Brekeke Master Guru
Joined: 15 Nov 2007 Posts: 319
Location: Florida
|
Posted: Fri Dec 19, 2008 3:24 pm Post subject: |
|
|
>> gets a 407 error.
This is because you are using the INVITE-Authentication in Brekeke..
Use "$auth=off" in the DialPlan.
Matching Patterns | $request = ^INVITE $addr = 146\.82\.219\.20
| Deploy Patterns | $auth = off $continue = true
|
|
|
Back to top |
|
|