Author |
Message |
michaelkoh Brekeke Member
Joined: 13 Sep 2007 Posts: 16
|
Posted: Tue Nov 04, 2008 1:43 am Post subject: FXO with Dynamic IP |
|
|
1. Brekeke Product Name and version:
2. Java version:
3. OS type and the version:
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
I have connect to a FXO that is on a Dynamic IP. This FXO is using a account (101) to register with the SIP PBX. How do I set the dial plan to route the calls out via this FXO since I dont know the IP. |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Tue Nov 04, 2008 11:39 am Post subject: |
|
|
which version of brekek pbx are you using?
and what kind of FXO? |
|
Back to top |
|
michaelkoh Brekeke Member
Joined: 13 Sep 2007 Posts: 16
|
Posted: Tue Nov 04, 2008 6:01 pm Post subject: |
|
|
hope wrote: |
which version of brekek pbx are you using?
and what kind of FXO? |
PBX ver 2.2.1.1
The FXO is from AllWin. Is this dependant on the FXO? What if I am using quintum? I have both. |
|
Back to top |
|
jelly Brekeke Talented
Joined: 20 Jun 2007 Posts: 62
|
Posted: Thu Nov 06, 2008 12:25 pm Post subject: |
|
|
Does your FXO gateway support 2 stage dialing?
if so, change the FXo gateway setting to 2 stage dialing, and dial 101. once you hear the dial tone, dial the PSTN number. |
|
Back to top |
|
amr_elsawi Brekeke Talented
Joined: 19 Nov 2006 Posts: 54
Location: Kuwait
|
Posted: Mon Nov 24, 2008 7:56 am Post subject: |
|
|
I think you can do the following:
make the FXO device as a 2 stage dialing normally, and you can forward the calls to it as the following, from the ARS:
- for example if you need to dial 9 and then dial any local number so you can make the ARS as the following:
ARS: patton- OUT
Matching Patterns | To = sip: 9(.+)@
|
Deploy Pattern:
To: sip:101@
DTMF: {1sec}{1sec}$1
so if you dial 9 xxxxxx(local number for example), so the PBX will dial 101 and then dial the local number after 1 second.
Thank you |
|
Back to top |
|
|