how to configure linksys ATA adapter with brekeke?

visagarwal

1. Brekeke Product Name and version: PBX 2.2.5.8

2. Java version: Jre6.0

3. OS type and the version: windows xP Proff.

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem: I an trying to using my Linksys Ata PAp2t adapter with Brekeke sip server but i am unable to configure the right setting. i tried a lot but in vain.
i just want to configure it in my local lan (interanet) not on internet.

Pl. Help me

thanks in advance

vishal
india

Razz

lakeview · Posted: Wed Nov 26, 2008 6:07 pm Post subject:

Have you read the Linksys's documents?
What kind of settings do you want to know?

visagarwal · Posted: Wed Nov 26, 2008 11:23 pm Post subject: re:

actually i want to talk in my local lan with analog phone, ATA adaptor and Bre. sip server. my local server ip is 192.168.7.20. i don't know how to configure ata adaptor with this ip. pl. help.

Thanks in Adv.

vishal

lakeview · Posted: Sun Nov 30, 2008 1:24 am Post subject:

I think you need to read the gateway's document at first..
Because you need to specify the SIP Server's IP address (192.168.7.20) in the settings of the gateway..

Good luck.