Pstn Line Cut problems

howard0320 · Brekeke Newbie Joined: 03 Jul 2008 Posts: 4

1. Brekeke Product Name and version:

2. Java version:

3. OS type and the version:

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem:

<<<Using e-lite and Hardware phone to Call PSTN Line Cut Problems >>>>

-Use x-lite (ext 1000) to call x-lite (ext 1001 ) No Line cut problem
- Use Voip phone (ext 2000) to call Voip phone (ext 2001 ) No Line cut problem

-Use x-lite (ext 1000) to call PSTN and It will line cut after 180 sec
- Use Voip phone (ext 2000) to call PSTN and It will line cut after 90 sec

how can i solve this problems ?
is Codec, ARS or others problems

Hope anyone can help me !!!
1000000000000000thx

james · Brekeke Master Guru Joined: 10 Dec 2007 Posts: 498

Your post is lack of information...

How do you connect the PBX to the PSTN?
Are you using FXO gateway? If so, which product is it??
Are you using a VoIP provider? If so, which service is it??
Which version of Brekeke PBX are you using???
Can you hear voice before the line-cut happens????
How about a call from the PSTN to the X-Lite?????

aarrow · Brekeke Junior Member Joined: 28 Aug 2008 Posts: 8

This sounds like it may be a problem with the SIP Session Timer. Checking the SIP trace logs from the XLite will tell you for sure. You might also contact your PSTN gateway/provider to confirm whether they support the SIP session timer.