voip guard

Pierreswing · Posted: Sun May 24, 2015 8:14 am Post subject: voip guard

1. Brekeke Product Name and Version: 3.4.5.1/410

2. Java version:1.8.0_45

3. OS type and the version: os 6.1 - win7

4. UA (phone), gateway or other hardware/software involved: gateway

5. Your problem:
hello,
I need help, I started on a video phone voip Linkcom doorman.
I installed the Brekeke server sip. He is active. However impossible to communicate to configure the server sip !! I am very beginner !!!
I created a user 3000 with a password 1234 by pressing the video phone I have many logs arriving but could not find. Can anyone help me please.

log brekeke:
2015-05-24 15:25:17.122 192.168.1.250:5060 INVITE 407 Authorization failed sip:3000@192.168.1.5 sip:3000@192.168.1.5 sip:3000@192.168.1.5 VoIP Guard

Linkcom :
Serveur proxy SIP Adresse: 192.168.1.5
Port: 5060
Serveur d'enregistrement SIP Adresse:
Port:
Proxy Sortant Adresse:
Port:

Authentification SIP Utilisateur: 3000
Mot de passe: 1234
Auth. ID:
Expiration time [sec]:

Erreur d'enregistrement

Laurie · Brekeke Master Guru Joined: 07 Jan 2008 Posts: 245

>2015-05-24 15:25:17.122 192.168.1.250:5060 INVITE 407 Authorization failed

Refer the above log line. It indicates "407 Authorization failed" which means that the username or/and password doesn't match.

Check the username or/and password again.

Pierreswing · Posted: Sun May 31, 2015 8:32 am Post subject:

Hello and thanks Laurie

I searched long hours and I finally managed to set the interface of voipguard. As you said it was a password problem.

As against this only works on the internal network. How to set to work outside the home network ?

Tata · Brekeke Master Guru Joined: 27 Jan 2008 Posts: 223

What kind of problem do you have with the outside the network?
Is it an audio issue? Set the "RTP relay" with "on" in the SIP server's RTP configuration page.

Pierreswing · Posted: Sat Jun 06, 2015 4:29 pm Post subject:

Hello and thanks.
I have the RPT with on now.
Actually my problem is that my IP video phone works only when I'm on the intranet but not when I leave this network. for example when I'm in town I do not collect calls.
I do not know how to set Brekeke for.

ambrosio · Brekeke Master Guru Joined: 27 Mar 2008 Posts: 215

Does the Brekeke SIP Server have a public (global) IP address which can be accessed from outside of the home network? or did you configure the port-forward from the home router to the SIP Server?

Pierreswing · Posted: Fri Jun 19, 2015 4:49 pm Post subject:

Hello, thanks for your reply.
No I do not have a public IP address.
Just internally. How set the Brekeke server for me to receive a call when my phone is not on the LAN?

Laurie · Brekeke Master Guru Joined: 07 Jan 2008 Posts: 245

Where is the phone located? another LAN? 3G?

Pierreswing · Posted: Thu Jul 30, 2015 6:11 pm Post subject:

Hello and sorry for my late answer.
Yes, I would like to receive calls from my Portier video on my Iphone 3g or 4g when I'm outside.
thanks in advance

janP · Brekeke Master Guru Joined: 25 Nov 2007 Posts: 336

You said the SIP Server doesn't have a public IP address.

so.. how did you setup the Portier video client to point the SIP Server's IP address?

Pierreswing · Posted: Sun Aug 02, 2015 11:09 am Post subject:

My Brekeke server has 192.168.1.5 ip adress in intranet.
How can I do to have an public ip in the brekeke server.
Is it possible ?
So my voip guard has 192.168.1.250 ip adress an I have in the sip parameters the adress ok my brekeke server 192.168.1.5.
It is working find in intranet but not outside !!
Is anybody can help me ? I am not very good in this kind of application
Pierre

janP · Brekeke Master Guru Joined: 25 Nov 2007 Posts: 336

This will help you.
http://wiki.brekeke.com/wiki/Set-port-forwarding

Pierreswing · Posted: Mon Aug 03, 2015 4:16 pm Post subject:

thanks
i will check that next days
pierre