brekeke sip server NAT problem

fangqikun · Brekeke Junior Member Joined: 27 Jul 2015 Posts: 6

1. Brekeke Product Name and Version: Brekeke SIP Server 3.4.7.2/411-1

2. Java version: 1.7.0_79

3. OS type and the version: CentOS 6.6 2.6.32-504.23.4.el6.x86_64

4. UA (phone), gateway or other hardware/software involved: linphone

5. Your problem:

I have a brekeke sip server is placed in a private network, configure the private network address: 10.34.14.24, mask: 255.255.255.224, gw: 10.34.14.30.
In another segment of the same private network, there is a sip client, IP: 10.34.240.130, mask: 255.255.255.192, gw: 10.34.240.190

I will address a public network through a router is mapped to 10.34.14.24.

Now I want the public network and private network sip client can sip client communication, how should I do?

Because I just started learning sip, so they need detailed examples for reference.

Thank you very much.

Tata · Brekeke Master Guru Joined: 27 Jan 2008 Posts: 223

Generally use router's port forwarding feature.
If the router supports UPnP, enable it.

http://wiki.brekeke.com/wiki/Configuration-for-BSS-behind-NAT
http://wiki.brekeke.com/wiki/Set-port-forwarding