| Author |
Message |
Handerson
Brekeke Junior Member
Joined: 13 Mar 2010
Posts: 7
|
 Posted: Fri Jun 08, 2012 12:35 am Post subject: SIP server can't register |
 |
|
1. Brekeke Product Name and version:
SIP Server v3.x
2. Java version:
6.0.310
3. OS type and the version:
Win7 Home Ed
4. UA (phone), gateway or other hardware/software involved:
X-Lite, QuteCom softphones, and Grandstream IP phone
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
Pattern 1
6. Your problem:
I downloaded the latest SIP server V3.x, and installed on computer A (Windows 7 OS). X-Lite softphone installed in Computer A as well, QuteCom softphone installed in Computer B (WinXP OS), and an IP phone in the same LAN.
I can start SIP server in Computer A with the trial account, and created two user accounts following the Quick Start Guide. User IDs are 100 and 101. 100 is assigned to X-Lite phone, 101 assigned to QuteCom phone. If I use all default settings in SIP server, then X-Lite phone can't register at all; if I make SIP Authentication Register and Invite off, the X-Lite can register, but QuteCom can't. The IP phone was used to replace QuteCom and assigned 101; it could not register either.
It is a simple test in the first trial but failed  Anybody can help me out please? Thanks~~ |
|
| Back to top |
|
janP
Brekeke Master Guru
Joined: 25 Nov 2007
Posts: 336
|
| Posted: Fri Jun 08, 2012 1:04 am Post subject: |
|
|
it is weird...
Did you restart the SIP Server after you tuned the Authentication settings? |
|
| Back to top |
|
Handerson
Brekeke Junior Member
Joined: 13 Mar 2010
Posts: 7
|
| Posted: Sat Jun 09, 2012 1:45 am Post subject: |
|
|
| janP wrote: |
it is weird...
Did you restart the SIP Server after you tuned the Authentication settings? |
Yes, I restarted the server. I even tried to restart the computer.
Anybody can share your successful experience in installing SIP server V3.x in Windows? |
|
| Back to top |
|
Tata
Brekeke Master Guru
Joined: 27 Jan 2008
Posts: 223
|
| Posted: Sat Jun 09, 2012 6:44 pm Post subject: |
|
|
| are you sure the REGISTER authentication is off? |
|
| Back to top |
|
Handerson
Brekeke Junior Member
Joined: 13 Mar 2010
Posts: 7
|
| Posted: Sun Jun 10, 2012 10:21 pm Post subject: |
|
|
| Tata wrote: |
| are you sure the REGISTER authentication is off? |
If I set Configuration -> SIP -> Authentication -> REGISTER on, then X-Lite can't register, and the message X-Lite said is:
Account failed to enable
Account A could not be enabled.
Unknown error. Contact your administrator.
This X-Lite is installed in the same computer as the SIP server.
I have also installed another X-Lite in another computer in the same LAN. It showed error message a bit differently:
Account failed to enable.
Account B could not be enabled.
Problem at server (SIP error 408). Try again later.
Is this error message useful for you?
=======================
If I set Configuration -> SIP -> Authentication -> REGISTER off, and restart SIP server, then the X-Lite in the same computer can register, but the X-Lite in another computer could not. |
|
| Back to top |
|
Tata
Brekeke Master Guru
Joined: 27 Jan 2008
Posts: 223
|
| Posted: Fri Jun 15, 2012 12:24 pm Post subject: |
|
|
It seems funny.
Are there any firewall or router which enables SIP-ALG?
A SIP-ALG will modify/block SIP packet sent from X-Lite.
For avoiding such an issue, I recommend that you test SIP at a clean environment at first. |
|
| Back to top |
|
Handerson
Brekeke Junior Member
Joined: 13 Mar 2010
Posts: 7
|
| Posted: Mon Jun 18, 2012 10:59 pm Post subject: |
|
|
| Tata wrote: |
It seems funny.
Are there any firewall or router which enables SIP-ALG?
A SIP-ALG will modify/block SIP packet sent from X-Lite.
For avoiding such an issue, I recommend that you test SIP at a clean environment at first. |
Thanks guys. I finally solved the problem by disabling Windows firewall. Your guys' discussion helped in heading in the right direction.  |
|
| Back to top |
|
Tata
Brekeke Master Guru
Joined: 27 Jan 2008
Posts: 223
|
| Posted: Tue Jun 19, 2012 10:00 am Post subject: |
|
|
Wow...
If you open the following ports at the firewall, you don't have to disable it.
-----------------------------------
UDP:5060 (for SIP packet)
UDP:10000-10999 (for RTP packet)
-----------------------------------
http://wiki.brekeke.com/wiki/Using-Brekeke-product-with-a-firewall |
|
| Back to top |
|
|
