Disconnected by system in Log but call has 1 hour duration

KentC

1. Brekeke Product Name and version:
Brekeke SIP Server , Version 2.4.8.6 Advanced
2. Java version:
1.5.0_17
3. OS type and the version:
SunOS 5.10
4. UA (phone), gateway or other hardware/software involved:
N/A
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
http://www.brekeke-sip.com/bbs/network/networkpatterns.html
6. Your problem:

The session that was received by the person i sent this call to their system didn’t get any messages “Cancel” or “Bye” and this call stuck and had duration 1 hour. In my logs it shows ", Disconnected by system, -1"

Please advise on what the problem here is and how to go about fixing such

ambrosio · Brekeke Master Guru Joined: 27 Mar 2008 Posts: 215

Which value did you set at the [Talking Timeout] in the SIP Config page?

KentC · Posted: Mon May 07, 2012 12:27 pm Post subject:

Talking Timeout (ms) = 259200000

The two calls in question disconnected @ 25 seconds/@ 32 seconds.

Thoughts?

ambrosio · Brekeke Master Guru Joined: 27 Mar 2008 Posts: 215

Was the call disconnected just after 1 hour?

KentC · Posted: Mon May 07, 2012 1:50 pm Post subject:

Yes, this is what the receiving party explained to me that the call was a duration of 1 hour. The one that was 32 seconds on our end and gave the disconnect message in our logs.

EDIT:
Any update? Suggestions?

lakeview · Posted: Tue May 08, 2012 11:29 am Post subject:

Do you have "net.sip.timeout.bye" settings in the [Configuration] > [Advanced] page, or the "sv.properties" file?

If yes, which value do you have?

KentC · Posted: Tue May 08, 2012 6:29 pm Post subject:

No we don't have that set, what would be the ideal setting for that?

Please advise. Thanks!!

EDIT:

net.sip.timeout.bye=true

is that what you want me to add and test? or magical number i can try?

lakeview · Posted: Wed May 09, 2012 10:44 am Post subject:

You can set a value in millisecond.
For example: 20min
net.sip.timeout.bye=1200000

It means the SIP Server will end a session after 20min which is at closing phase.

Also I doubt.... are you using any session plugin which has a timer??

KentC · Posted: Wed May 09, 2012 4:25 pm Post subject:

file.log.plugin = *********.ShutdownCheck
net.sip.fixed.addrport.uas = true
^
That's the settings in total under Config>Advanced tab in GUI

I don't see anything else that could be affecting,nothing in the dial plan would affect this either right:

Here is the the only dial plan i see that built deals with logging:
It's the first Priority Rule in our Dial Plan

Deploy Patterns

&net.sip.len.logging = 15
$session = *.Logging
$continue = true

Note that *.Logging is actually a custom rule that was given to my group in regards to logs, but those are the only things I am aware of.

* = company name censored

Please advise and thanks for continuing to follow up.

lakeview · Posted: Thu May 10, 2012 5:09 pm Post subject:

I see.

One more thing I want to know... were you using the RTP-Relay when the call got the "Disconnected by system"?
Because it has the timeout.

KentC · Posted: Fri May 11, 2012 8:36 am Post subject:

Configuration(Tab)>RTP(Tab)

RTP relay = Auto
RTP relay (UA on this machine) = Off

lakeview · Posted: Fri May 11, 2012 1:04 pm Post subject:

What's the [RTP Session Timeout]'s value?

KentC · Posted: Fri May 11, 2012 1:42 pm Post subject:

RTP Session Timeout (ms) = 600000

lakeview · Posted: Sat May 12, 2012 6:42 pm Post subject:

Your these settings seem no problem.

Does the disconnection issue still persist?

KentC · Posted: Sat May 12, 2012 9:31 pm Post subject:

Well..it did for that call,i guess the question is since were using the latest version, should we have this setting?

net.sip.timeout.bye

Should we add this and have the client retry? I'm not sure how many times it's happened overall. I read in earlier versions it was a bug.

lakeview · Posted: Tue May 15, 2012 8:12 pm Post subject:

You don't have to set "net.sip.timeout.bye" because it has default value.

Does the caller or callee have a problem in sending CANCEL and BYE?

KentC · Posted: Wed May 16, 2012 10:08 am Post subject:

Thanks alot!

i have spoken with the group here and since things are configured correctly, we can't see where the BYE or CANCEL was sent, so we've addressed this with client and are leaving it at that since this is just on one call, and since this was a known bug in older versions,we'll chalk it up to that.

Appreciate your help in this resolution!

Kent C.