Author |
Message |
siemensuser Brekeke Newbie
Joined: 04 Apr 2012 Posts: 2
Location: Seattle
|
Posted: Wed Apr 04, 2012 2:17 pm Post subject: Connecting Brekeke SIP Trunk to Siemens Openscape Voice SIP |
|
|
1. Brekeke Product Name and version:not sure
2. Java version:
3. OS type and the version:
4. UA (phone), gateway or other hardware/software involved: Openscape Voice SIP
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem: Has anyone experienced connecting a Brekeke SIP switch to an OpenScape Voice SIP switch via SIP Trunking. The Brekeke server is used by Rauland 5 Nurse Call to host their SIP endpoints and we need to SIP trunk to the Siemens OpenScape Voice platform for dial plan interoperability between Ascom i62 Wireless handsets regsitered as SIP endpoints on the Siemens OpenScape SIP Server and the Nurse call application hosted on the Brekeke SIP server. _________________ SiemensUser |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
|
Back to top |
|
siemensuser Brekeke Newbie
Joined: 04 Apr 2012 Posts: 2
Location: Seattle
|
Posted: Wed Apr 04, 2012 3:15 pm Post subject: Ascom Connectivity to Brekeke |
|
|
Thank you for the link to this note. I was hoping that someone out there had experience connecting the Brekeke to the Siemens SIP switch via SIP trunking but I can pursue that with Siemens Thanks Again _________________ SiemensUser |
|
Back to top |
|
lakeview Brekeke Master Guru
Joined: 15 Nov 2007 Posts: 319
Location: Florida
|
Posted: Wed Apr 04, 2012 3:58 pm Post subject: |
|
|
It seems Ascom phones are registered on the OpenScape Voice server.
Try the following Dial Plan rules.
Rule-1: To OpenScape
Matching Patterns | $request = ^INVITE $registered = false To = sip:(.+)@
| Deploy Patterns | $auth = false
To = sip:%1@<OpenScape's IP Address> |
Rule-2: From OpenScape
Matching Patterns | $request = ^INVITE
$addr = <OpenScape's IP Address> | Deploy Patterns | $auth = false
|
Do you know which transport protocol (TCP or UDP) does the OpenScape use? |
|
Back to top |
|
|