Author |
Message |
juanmanuel Brekeke Guru
Joined: 04 Mar 2009 Posts: 107
Location: Medellin,Colombia
|
Posted: Thu Mar 17, 2011 2:52 pm Post subject: Incoming DTMF not recognized |
|
|
1. Brekeke Product Name and version: PBX Version 2.4.7.3
2. Java version:
3. OS type and the version:
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
When PbX receives a call from a registered UA the DTMF sent are recognized by the AA, in this case the call is answered by AA and redirected to extension dialed by DTMF
But when it receives a call from one non registered UA, the DTMF are not recognized, in this case the call is answered by AA but not redirected to extension dialed by DTMF
The diference I see is that the INVITE from registered UA includes NOTIFY but the INVITE from non registered does not.
Dose this diference cause the problem?
Thanks and Best Regards _________________ Juan Manuel Acevedo
Medellin, Colombia
email:jacevedo@e-global.com.co |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Fri Mar 18, 2011 2:47 pm Post subject: |
|
|
what type DTMF used by caller?
what codecs used for the call?
how about change caller DTMF as SIP INFO?
have you set [RFC2833] on at pbx/options? |
|
Back to top |
|
juanmanuel Brekeke Guru
Joined: 04 Mar 2009 Posts: 107
Location: Medellin,Colombia
|
Posted: Fri Mar 18, 2011 3:04 pm Post subject: |
|
|
Thanks for your answer
DTMF using RFC2833 at PBX as well at UA, codec G711 mu law
I have change to SIP-INFO and the result is the same.
I see at Sniffer that after the UA send the DTMF using RTP EVE, Brekeke PBX does noy send any confirmation for recieve it, as does when the UA is registered. _________________ Juan Manuel Acevedo
Medellin, Colombia
email:jacevedo@e-global.com.co |
|
Back to top |
|
|