Author |
Message |
REHANCELLIERS Brekeke Member
Joined: 09 Mar 2011 Posts: 20
Location: South Africa
|
Posted: Tue Mar 15, 2011 3:28 am Post subject: How does one connect an Asterisk Server to a Brekeke PBX? |
|
|
1. Brekeke Product Name and version:
Brekeke PBX, Version 2.4.5.5 , Multi-Tenant
2. Java version:
java version "1.6.0_20"
3. OS type and the version:
Windows 2003 Server
4. UA (phone), gateway or other hardware/software involved:
Asterix server and SVK Billing Server
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
How does one connect an Asterisk server to a Multi Tennant client?
1. I have created a Tennant
2. I created a user with a:
a. DNS Name
b. Defined User ID
c. Password
3. I can connect a Soft Phone to the tenant user and make and receive calls.
4. When I connect the Asterisk Server with the same DNS Name, Username & ID, I get stuck on “Awaiting Authorisation”
5. The Asterisk Server is on another LAN
6. What am I doing wrong? _________________ conxus |
|
Back to top |
|
Haddas Brekeke Guru
Joined: 17 Jan 2008 Posts: 170
|
Posted: Wed Mar 16, 2011 10:48 am Post subject: |
|
|
let me clarify...
do you want to use an Asterisk as another service?
if yes, create new ARS for connecting to Asterisk.
do you want to use an Asterisk as a SIP client??
if yes, register Asterisk in the Brekeke as SIP client.
otherwise, give me more details.. |
|
Back to top |
|
REHANCELLIERS Brekeke Member
Joined: 09 Mar 2011 Posts: 20
Location: South Africa
|
Posted: Wed Mar 16, 2011 11:19 pm Post subject: Asterisk PBX Server to Brekeke |
|
|
Yes the last Scenario is the one and that is precisely my problem.
A cannot in some instances get it right to get the Asterisk PBX to register as a SIP Client (Multi Tennant).
When I set the Asterisk Server up as follows, I get it to register and receive inbound calls, but cannot make outgoing calls:
disallow=all
allow=g729
host=theSipServerDnsName
insecure=very
secret=thePassword
type=peer
username=theUserID
context=from-trunk
Under Registration string:
theUserID:thePassword@theSipServerDnsName
" theSipServerDnsName" is the Brekeke SIP Server to be register to, "theUserID" is the person’s SIP userID and "thePassword" his password.
Is there anybody who has successfully connected an Asterisk PBX server to Brekeke PBX as a SIP client who can assist me with the Asterisk set-up? _________________ conxus |
|
Back to top |
|
janP Brekeke Master Guru
Joined: 25 Nov 2007 Posts: 336
|
Posted: Thu Mar 17, 2011 10:52 am Post subject: |
|
|
Have you tried Brekeke PBX with Single Tenant mode?
On the Single Tenant, Do you get the same issue? |
|
Back to top |
|
REHANCELLIERS Brekeke Member
Joined: 09 Mar 2011 Posts: 20
Location: South Africa
|
Posted: Thu Mar 17, 2011 11:40 am Post subject: |
|
|
No we haven't and we can't. Too many tennants on our system already. Multi Tennant License. _________________ conxus |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Thu Mar 17, 2011 1:56 pm Post subject: |
|
|
capture packets at brekeke server about the call from Asterisk to brekeke and check
what response sent from brekeke
is there any auth infor sent back from Asterisk
is the From header sip id and auth id the same as what set at brekeke side/sip server/user authentication
there is pbx trial which can be download from
http://www.brekeke.com/download/download_pbx_2_0.php
you can install it on anther pc and test with Asterisk
it will be easier to check the issue |
|
Back to top |
|
|