Author |
Message |
bundaskutya Brekeke Newbie
Joined: 03 Aug 2010 Posts: 4
|
Posted: Tue Aug 03, 2010 1:19 am Post subject: Incoming calls no ringing |
|
|
1. Brekeke Product Name and version: 2.4.5.5 , Pro
2. Java version: (build 1.6.0_20-b02)
3. OS type and the version: Vista Business SP2
4. UA (phone), gateway or other hardware/software involved: Linksys SPA-3102, Software Version:3.3.6(GW) Hardware Version:1.4.5(a)
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
The voip devices are registered to the SIP server and can make outbound calls without problems. Calls between registered users work also flawlessly. But the incoming calls no ringing. Call logs of the Sip server have note: result busy. error 486
What is the problem? |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Tue Aug 03, 2010 11:03 am Post subject: |
|
|
are you using brekeke pbx?
you need to add dial plan to accept calls from voip device without checking authentication
and at pbx side create ARS pattern-in to route the calls from voip devices(which is not registered at brekeke) to pbx users
From PBX v2.2.7.7 and later, the calls will be rejected by PBX when no ARS rule can be applied to the calls from/to non-registered users.
http://wiki.brekeke.com/wiki/Security
http://wiki.brekeke.com/wiki/Update-issues-post-v2277 |
|
Back to top |
|
bundaskutya Brekeke Newbie
Joined: 03 Aug 2010 Posts: 4
|
|
Back to top |
|
bundaskutya Brekeke Newbie
Joined: 03 Aug 2010 Posts: 4
|
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Thu Aug 05, 2010 10:43 am Post subject: |
|
|
Quote: |
now the outbound calls can't make yet. |
does the incoming calls from 192.168.0.101 work now?
for outbound calls, you need the ARS pattern-out like
Matching Patterns:
To: sip:9(.+)@
Deploy Patterns:
To: sip:$1@destination_IP
when dialing number has prefix 9 the call will be sent to destination_IP without prefix 9
and it seems the default dial plans are old ones
you can find updated one at http://wiki.brekeke.com/wiki/Security |
|
Back to top |
|
bundaskutya Brekeke Newbie
Joined: 03 Aug 2010 Posts: 4
|
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Fri Aug 06, 2010 10:20 am Post subject: |
|
|
there is no authentication enabled at sip server side, you may not need dial plan for incoming calls for now.
try the following ARS pattern-IN
matching:
To: sip:incoming_dialing_number@
Deploy:
To: pbx_ext |
|
Back to top |
|
|