Paging to several phones

[juanmanuel]

1. Brekeke Product Name and version: PBX 2.4.3.9

2. Java version:

3. OS type and the version:

4. UA (phone), gateway or other hardware/software involved:

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem:

I need to send a paging call to several phones at same time, I have set a ringing group, but I can ear the voice at the first one answers the call but not the other are at same group.
Does anybody know how can I to make a paging group?

Thanks

[hope]

do you want all phones in ring group answer the call at the same time and can talk to each other?
you need to use conference with paging, check "broadcasting" at http://www.brekeke-sip.com/download/bpbx/v2_x/pbx_manual_user_en.pdf

[juanmanuel]

What I want is to make a paging call to several phones so all I say by the phone originates the call, be eared for all the destinations phones, example:

821, 822, 823 are extension with hard phones, I want to set extension, for example 830, so when I call to 830 and I say "hello", this "Hello", be eareed by the speakers of all phones.

I have set a ringing group with forwardind to 821,822,823 but when I make the call, the "Hello" is eared only by the 821 phone because it answers the call. It is clear?
Thanks

[hope]

set 830 as conference then all exts set in 830 forwarding destinations will answer the call

[juanmanuel]

Thanks, it works, all phone receives the call and I can speak to all of them, but when I finish the call at phone originates, all of the destinations phones remains with the call open and sound the music on hold.

It is possible that when I finish the call, all the destinatios phones finish the call as well?

[hope]

then you need to use auto monitoring:
at one of the phones' user edit page set "forwarding destinations*" as <ext>{p} and at this user's "auto monitoring" field set other phones' <ext1>{p}, <ext2>{p}

[juanmanuel]

Thanks, please help me to understand this:

There are two ways to make a call in broadcasting mode:
♦ Set ~(tilde)<extension number> in an extension’s [Automatic Monitoring*] field, the
extension’s call will be in “Broadcast” mode. And when the extension’s call is disconnected,
all monitoring extensions’ call will also be disconnected.

At what extension number do I configure the ~<extension number>? in automating monitor?

I want to create one extension that when I dial it, a group of extensions go to Broadcasting way and hang up all the extensions when I hang up the phone is calling.

BR

[hope]

if want to broadcast to pbx ext 101,102,103,104
at one of above ext, such as 101, user page/auto monitoring field: ~102,~103,~104
and make call to 101

[juanmanuel]

Thanks, I have a question:

Does 101 is one standard extension, or a conference extension, do I must to configure something at forwarding destinatinations?

I ask because I have configured as your indications and is not working,

BR

[hope]

101 is standard extension and need to have phone registered with this extension
not settings at 101 forward destinations field

what happened if call to 101?
the phones registered with101, 102, 103,104 didnot ring?
capture packets and check what response to the call

[juanmanuel]

When I dial to 101, rings in other extensions, rings as a normal call, not as paging call.

I have deleted all the configuration for monitoring and I have called 22*101 and I can see at trace that in the INVITE packet exists one parameter Call-Info: <sip:127.0.0.1>;answer-after=0

When I call at 101 with the configuration for monitoring extensions (~102etc), I can see that the INVITE is sended without the parameter Answer-after=0, and the call is like a normal call.

[hope]

hi,
~ means User cannot talk , listen only
it is not for paging
check pbx user guide last page for usage at
http://www.brekeke-sip.com/download/bpbx/v2_x/pbx_manual_user_en.pdf

if need both page and mute for broadcasting,
set user 101/auto monitoring field as
102{p;m},103{p;m},104{p;m}
and at user 101/forwarding destination field set 101{p;m}
and make call to 101