Dial plan added, now no Registered Clients showing

achooi · Brekeke Member Joined: 17 Aug 2009 Posts: 21

1. Brekeke Product Name and version: Brekeke SIP Server , Version 2.3.7.4 Standard

2. Java version: 1.5.0 (build 1.5.0_07-b03)

3. OS type and the version: Windows Server 2003 Ent. Edition. SP2

4. UA (phone), gateway or other hardware/software involved: pap2

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : Pattern 4

6. Your problem: I added a dialplan and now no "Registered Clients" are showing but calls do show up in the "Active sessions" tab. My BSS is set to relay traffic and i also have asterisk & serproxy server that does the sip messaging/registration. Is it possible to see regisetered clients on BSS eventhough my asterisk & serproxy is doing the sip messaging/regisration?

Dial plan I added:

Matching Patterns

$request = ^REGISTER
To = sip:(.+)@x.x.x.x (this is my serproxy address)

Deploy Patterns

$target = x.x.x.x (this is my serproxy address)

tuie2 · Brekeke Talented Joined: 23 Jan 2009 Posts: 57

$target is not for REGISTER.
Use Upper Registration function instead.

achooi · Brekeke Member Joined: 17 Aug 2009 Posts: 21

Can I list multiple servers in the "Register Server" field?

lakeview · Posted: Mon Aug 24, 2009 6:46 pm Post subject:

>> Can I list multiple servers in the "Register Server" field?

No.
But you can use the DialPlan rule below to define the target address with IP address.

Matching Patterns

$request = ^REGISTER
To = sip:(.+)@x.x.x.x (this is a serproxy address)

Deploy Patterns

&net.registrar.upper.allow = true
&net.registrar.upper.url = x.x.x.x (this is a serproxy address)
$continue = true

achooi · Brekeke Member Joined: 17 Aug 2009 Posts: 21

Thank you for the help! Appreciate it.