Author |
Message |
Mahima Brekeke Junior Member
Joined: 24 Jul 2009 Posts: 7
|
Posted: Mon Aug 10, 2009 1:03 am Post subject: 603 decline response for invite message |
|
|
1. Brekeke Product Name and version:
2. Java version:
3. OS type and the version:
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem:
Hi All
When sending the following invite message;
INVITE SIP:6711@192.168.1.102 SIP/2.0
Via: SIP/2.0/TCP 192.168.1.117:5060
Max-Forwards: 70
From:
To:
Call-ID: 14462@192.168.1.117
User-Agent: TotalView 1.0
CSeq: 3 INVITE
Contact:
Content-Type: application/sdp
Content-Length: 0
(where 1.6711 is callee's no IP:192.168.1.110
2.6710 is caller's no IP:192.168.1.117 both are properly registered in brekeke server IP:192.168.1.102).
to the SIP Server a 603 decline message is received:
response is:
SIP/2.0 603 Decline
Via: SIP/2.0/TCP 192.168.1.117:5060;received=192.168.1.102
From:
To: ;tag=b15ca8215s
Call-ID: 8379@192.168.1.117
CSeq: 3 INVITE
Server: Brekeke SIP Server rev.286 Evaluation
Content-Length: 0
Any help for a newbie would be appreciated
Thanks&Regards
Mahima |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Mon Aug 10, 2009 12:45 pm Post subject: |
|
|
is there any dialplan applied when you make the call?
is the TCP-handling set on at BSS/configuration/sip/ ?
is the BSS local sip port changed? |
|
Back to top |
|
Mahima Brekeke Junior Member
Joined: 24 Jul 2009 Posts: 7
|
Posted: Mon Aug 10, 2009 10:29 pm Post subject: 603 decline |
|
|
1.dialPlan is set to
Matching Patterns: $request=^INVITE
To=sip:6711@
Deploy Patterns: To=sip:6711@192.168.1.110
2. TCP Handling is on in BSS\Configuration\SIP
3.Local Port is set to 5060 in BSS\Configuration\SIP |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Tue Aug 11, 2009 4:14 pm Post subject: |
|
|
if not use dialplan, is there any difference? |
|
Back to top |
|
Mahima Brekeke Junior Member
Joined: 24 Jul 2009 Posts: 7
|
Posted: Tue Aug 11, 2009 11:09 pm Post subject: 603 decline |
|
|
No there is no change in response message(if dial Plan is not set). |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Wed Aug 12, 2009 2:27 pm Post subject: |
|
|
Is there any other dialplan related to call? if yes, please disable them.
can the call ring the callee when caller and callee use UDP only?
Can callee side handle TCP? and did you set "UDP failover" and " TCP-handling" on at is the at BSS/configuration/sip/ TCP?
from packets, who returned 603 first? callee or BSS? |
|
Back to top |
|
Mahima Brekeke Junior Member
Joined: 24 Jul 2009 Posts: 7
|
Posted: Thu Aug 13, 2009 4:56 am Post subject: |
|
|
There is no other Dial plan related to this call.
At the callee side i am using Adore softphone(which according to the the doc. supports both tcp and udp ).
"UDP failove" is set to "off" and "TCP-handling" is set to "on"
603 decline error is return from server(192.168.1.102)
When i make a call from one sip adore phone to another through "brekeke server" with the same dial plan it works fine |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Thu Aug 13, 2009 4:53 pm Post subject: |
|
|
Quote: |
When i make a call from one sip adore phone to another through "brekeke server" with the same dial plan it works fine |
Does the call use tcp?
can you call from Adore softphone to the totalview 6710?
please set "UDP failove" to "on" and "TCP-handling" to "on" ,
save the settings and restart sip server
and create a dialplan as
Matching Patterns | $request = ^INVITE To = sip:6711@
| Deploy Patterns | $transport = tcp To = sip:6711@
|
click "apply rules"
register both caller and callee to the BSS and test the call. |
|
Back to top |
|
Mahima Brekeke Junior Member
Joined: 24 Jul 2009 Posts: 7
|
Posted: Mon Aug 17, 2009 4:46 am Post subject: 603 decline |
|
|
Call between both adore sip phone is happening through 'UDP'
Does Brekeke SIP Server , Version 2.3.6.0 Evaluation Supports 'TCP'
'*TCP inactive in Personal/Academic Editions ' is mentioned in TCP Handling of 'BSS/Configuration/SIP ' |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Fri Aug 21, 2009 10:32 am Post subject: |
|
|
Version 2.3.6.0 Evaluation Supports 'TCP'
maybe Adore phone's problem?
did you try by setting "UDP failover" to "on" and "TCP-handling" to "on" and register both caller and callee to the BSS and test the call? |
|
Back to top |
|
Andrey Brekeke Addict
Joined: 21 Apr 2008 Posts: 29
|
Posted: Fri Aug 21, 2009 3:40 pm Post subject: |
|
|
Mahima,
Quote: |
INVITE SIP:6711@192.168.1.102 SIP/2.0
Via: SIP/2.0/TCP 192.168.1.117:5060
Max-Forwards: 70
From:
To:
Call-ID: 14462@192.168.1.117
User-Agent: TotalView 1.0
CSeq: 3 INVITE
Contact:
Content-Type: application/sdp
Content-Length: 0 |
Is it an actual packet?
It seems there are no From/To/Contact values... did you remove them? |
|
Back to top |
|
Mahima Brekeke Junior Member
Joined: 24 Jul 2009 Posts: 7
|
Posted: Mon Aug 24, 2009 5:09 am Post subject: 603 decline |
|
|
Hi
I have constructed a new Invite Message :
INVITE SIP:6711@192.168.1.117 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.102:5060;branch=z9hG4bK25504;rport..User-Agent: TotalView 1.0
From: <sip:6710@192.168.1.117>
To: <SIP:6711@192.168.1.117>
Call-ID: 16295
CSeq: 2 INVITE
Contact: <sip:6710@192.168.1.102:5060>
Content-Type: application/sdp
Allow: INVITE,INFO,ACK,CANCEL,BYE,OPTION,NOTIFY,MESSAGE,PING,REFER
Max-Forwards: 70
Content-Length: 0
here:
(192.168.1.117:5060 is Server Machine(Brekeke Server),
192.168.1.102:5060 is Client Machine Where i am trying to run my program ,extension On is 6710,
192.168.1.110 is another Client Machine where a sip Phone is configured ,extension no. is 6711.)
When i am sending invite message to sip Phone through Brekeke server i am getting decline 603 error.
SIP/2.**UnReg**line..
Via: SIP/2.0/UDP 192.168.1.102:5060;branch=z9hG4bK28751;rport=50195..
From: <sip:6710@192.168.1.117>..
To: <SIP:6711@192.168.1.117>;tag=b8a33d053s..
Call-ID: 27731..
CSeq: 2 INVITE..
Server: Brekeke SIP Server rev.286 Evaluation..Content-Length: 0....
UDP Socket Connection is getting use to send invite Message . |
|
Back to top |
|
lakeview Brekeke Master Guru
Joined: 15 Nov 2007 Posts: 319
Location: Florida
|
Posted: Mon Aug 24, 2009 6:50 pm Post subject: |
|
|
Are you using own made SIP client?? |
|
Back to top |
|
Mahima Brekeke Junior Member
Joined: 24 Jul 2009 Posts: 7
|
Posted: Tue Aug 25, 2009 5:14 am Post subject: 603 decline |
|
|
ya i using own made client ,
Trace taken by sniffer on server machine
Invite message sent from client:
INVITE SIP:6711@192.168.1.117 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.102:5060;branch=z9hG4bK25504;rport..User-Agent: TotalView 1.0
From: <sip:6710@192.168.1.117>
To: <SIP:6711@192.168.1.117>
Call-ID: 16295
CSeq: 2 INVITE
Contact: <sip:6710@192.168.1.102:5060>
Content-Type: application/sdp
Allow: INVITE,INFO,ACK,CANCEL,BYE,OPTION,NOTIFY,MESSAGE,PING,REFER
Max-Forwards: 70
Content-Length: 0
here:
(192.168.1.117:5060 is Server Machine(Brekeke Server),
192.168.1.102:5060 is Client Machine Where i am trying to run my program ,extension On is 6710,
192.168.1.110 is another Client Machine where a sip Phone is configured ,extension no. is 6711.)
While sending invite message to sip Phone through Brekeke server Using my client the response is coming as decline 603 error.
SIP/2.**UnReg**line..
Via: SIP/2.0/UDP 192.168.1.102:5060;branch=z9hG4bK28751;rport=50195..
From: <sip:6710@192.168.1.117>..
To: <SIP:6711@192.168.1.117>;tag=b8a33d053s..
Call-ID: 27731..
CSeq: 2 INVITE..
Server: Brekeke SIP Server rev.286 Evaluation..Content-Length: 0....
UDP Socket Connection is getting use to send invite Message .[/b] |
|
Back to top |
|
lakeview Brekeke Master Guru
Joined: 15 Nov 2007 Posts: 319
Location: Florida
|
Posted: Thu Aug 27, 2009 12:47 pm Post subject: |
|
|
Are you using any SDK for making your SIP client??
If you are a SIP client developer, contact Brekeke's support team and ask the interoperability test. |
|
Back to top |
|
|