Author |
Message |
ka2qhg Brekeke Addict
Joined: 21 Nov 2006 Posts: 34
|
Posted: Mon Aug 03, 2009 9:56 am Post subject: 486 returned on all calls |
|
|
1. Brekeke Product Name and version:
Brekeke PBX, Version 2.0.7.2 Pro Evaluation
ID: 00000000 , Users: 10 , Concurrent: 10
2. Java version:
1.5 update 14
3. OS type and the version:
Windows 2003 server with SP2
4. UA (phone), gateway or other hardware/software involved:
Callcentric , Linksys pap2
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : Pattern 9
Your problem:
I have a test setup for Brekeke PBX, Version 2.0.7.2 Pro Evaluation It shows my pap2 as registered as ex1001,1002 and it also shows that my PBX is registered to Callcentric.
When I try to make a call, it rings one or two times and then returns busy (486). It doesn't make any difference if I change the sip configuration. I have tried the pap2 on another Brekeke Sip server and the unit works fine. _________________ Larry |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Mon Aug 03, 2009 12:51 pm Post subject: |
|
|
did the brekeke PBX register to Callcentric by ARS?
who returned 486 busy
did linksys pap2 register to Brekeke pbx? is there any pbx user created for each linksys number? |
|
Back to top |
|
Laurie Brekeke Master Guru
Joined: 07 Jan 2008 Posts: 245
|
Posted: Mon Aug 03, 2009 6:06 pm Post subject: |
|
|
Larry,
Can you make a call between 1001 and 1002? |
|
Back to top |
|
ka2qhg Brekeke Addict
Joined: 21 Nov 2006 Posts: 34
|
Posted: Tue Aug 04, 2009 11:19 am Post subject: |
|
|
Both pap2 are registered to the Brekeke PBX. The Brekeke PBX is registered to Callcentric by ARS. I am unable to complete any calls. The call logs show 486 no matter what number I call. I have tried upper registration both on and off. The same with thru registration. _________________ Larry |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Tue Aug 04, 2009 11:36 am Post subject: |
|
|
i think you can call between pap2?
set upper registration off
use ARS pattern-in to accept call from Callcentric to pbx extension, like
pattern-IN
[Matching patterns]
To: sip:the_number_pbx_register_to_Callcentric@
[Deploy patterns]
To: pbx_extension(such as 1001,1002)
use ARS pattern-out to send call to Callcentric, like
pattern-OUT
[Matching patterns]
To: sip:9(.+)@
[Deploy patterns]
To:sip:$1@Callcentric_IP
the calls with prefix 9 will be sent to Callcentric |
|
Back to top |
|
ka2qhg Brekeke Addict
Joined: 21 Nov 2006 Posts: 34
|
Posted: Wed Aug 05, 2009 11:21 am Post subject: |
|
|
I am now able to make calls from one pap2 to another. I had six extensions registred and they all are working.
I still have a problem with incoming calls from Callcentric, but outgoing calls are now working. I have a work around that I can use to route calls from my Callcentric DIDs to fixed extensions.
I think I can solve the rest of the problem, thank you again for all your help. _________________ Larry |
|
Back to top |
|
|