Author |
Message |
AGCUSA Brekeke Junior Member
Joined: 13 Jul 2009 Posts: 8
Location: USA
|
Posted: Mon Jul 27, 2009 1:44 pm Post subject: FAX Calls |
|
|
1. Brekeke Product Name and version:Brekeke PBX 2.3.7.4 PRO
2. Java version:Latest
3. OS type and the version:Linux Redhat
4. UA (phone), gateway or other hardware/software involved:
SIPURA SPA2100 3.3.9
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem: I guess the PBX doesn't recognize t.38. I reviewed the forum and didn't see much that would help in my case. I am using the sip server in the PBX to send the fax calls out but cannot get the inbound calls to work with my ITSP through the sip server. I am using g.711u for the codec.
Outbound I use:
Matching Patterns | $request = ^INVITE $registered = false To = sip:([0-9]{11})@
|
Deploy:
To=sip:%1@ITSP IP Address
Inbound:
$request=^INVITE
To=sip:+13865xx5xxxx phone number dialed through ITSP
Deploy:
To=3865xx5xxxx
I may also be missing something in the matching and deploy fields to ensure that fax works.
Any help would be appreciated. |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Mon Jul 27, 2009 3:08 pm Post subject: |
|
|
http://wiki.brekeke.com/wiki/FAX-Support
Quote: |
Inbound:
$request=^INVITE
To=sip:+13865xx5xxxx phone number dialed through ITSP
Deploy:
To=3865xx5xxxx
|
is it like?
$request=^INVITE
To=sip:\+13865xx5xxxx@
Deploy:
To=sip:3865xx5xxxx@ |
|
Back to top |
|
AGCUSA Brekeke Junior Member
Joined: 13 Jul 2009 Posts: 8
Location: USA
|
Posted: Mon Jul 27, 2009 9:08 pm Post subject: FAX |
|
|
Hope:
I tried that and it didn't work either. I set up the same number in the PBX and the INcoming call works fine. I did register the PBX ARS with the ITSP but I don't know how to program the SIP server for registration. I tried several combination's. The calls from my ITSP are coming in from a specific IP address and is point to my specific IP address. They ship 11 digits.
AGCUSA |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Tue Jul 28, 2009 11:47 am Post subject: |
|
|
are you going to send and receive fax to/from ITSP by bypassing pbx?
which way is working? sending fax to ITSP?
you can also try inbound as
matching:
$request=^INVITE
$addr = ITSP_IP
Deploy:
To=sip:3865xx5xxxx @
Put it above the outbound dialplan |
|
Back to top |
|
AGCUSA Brekeke Junior Member
Joined: 13 Jul 2009 Posts: 8
Location: USA
|
Posted: Tue Jul 28, 2009 3:31 pm Post subject: Fax |
|
|
Hope,
I got it working like this:
Matching Patterns | $request = ^INVITE To = 1386nxxxxxx@
|
Deploy
To=386nxxxxxx@
$auth=off
Thanks for all your help and quick response!
AGCUSA |
|
Back to top |
|
|