Author |
Message |
JoBro Brekeke Newbie
Joined: 02 Jun 2009 Posts: 4
Location: Australia
|
Posted: Tue Jun 02, 2009 1:21 am Post subject: Brekeke SIP Trunk & OCS 2007 R2 configuration |
|
|
1. Brekeke Product Name and version: 2.3.6.0
2. Java version: 1.6.0 Update 13
3. OS type and the version: Windows 2008 x64
4. UA (phone), gateway or other hardware/software involved: ITSP & OCS 2007 R2
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : Pattern 8
6. Your problem:
Need help configuring my SIP Trunk provider in Brekeke.
I have been provided a SIP Server of "nsw.nexvoice.net.au" and a username and password.
I configured the server address in the upper registra address field, but i dont know how to authenticate to my provider, nor does it say anywhere that is has successfully authenticated to my provider, also how do i route all the calls to my ocs box.
my server ip's are as follows
Mediation Server: 10.6.0.3
Brekeke Server: 10.6.0.4
my number range is 0280883000 to 0280883099 which gives me 100 numbers. |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
|
Back to top |
|
JoBro Brekeke Newbie
Joined: 02 Jun 2009 Posts: 4
Location: Australia
|
Posted: Mon Jun 08, 2009 10:23 pm Post subject: |
|
|
Thanks for that, but you still havnt answered my question on how to configure my sip trunk and confirm that it has successfully registered with my sip provider. |
|
Back to top |
|
james Brekeke Master Guru
Joined: 10 Dec 2007 Posts: 501
|
Posted: Wed Jun 10, 2009 7:14 pm Post subject: |
|
|
Use Brekeke PBX instead of Brekeke SIP Server and set your account information at PBX's ARS settings.
Brekeke SIP Server will not be fit in your scenario. |
|
Back to top |
|
|