Author |
Message |
tomzhu Brekeke Member
Joined: 29 Sep 2008 Posts: 10
|
Posted: Thu Mar 19, 2009 8:02 pm Post subject: How to retain dialed number after forward? |
|
|
1. Brekeke Product Name and version:
2.2.6.6/276
2. Java version:
1.6.0_12
3. OS type and the version:
Windows XP Pro
4. UA (phone), gateway or other hardware/software involved:
Quintum ISDN Gateway
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
Pattern 2
6. Your problem:
Hi all, we have set up a pilot number for a hunt group round robin. But after the call has been routed, we can't get the original pilot number which has been dialed.
eg.
We have a pilot number "200" which forwards all calls to 201 until 209 round robin, we also have a pilot number "300" forwards calls to 201-209. It means that user can dial both 200 and 300 to ring at 201-209, but my question is, how can we differentiate the 2 kinds of call? On the SIP UA we just can received the callee as register number(201-209) no matter which pilot number(200 or 300) has been dialed.
Can we retain the dialed pilot number? This is a very useful feature in the IRV system, but I don't know how to do configuration on the brekeke pbx.
Your help will be appreciated! |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
Posted: Fri Mar 20, 2009 10:21 am Post subject: |
|
|
create an ars like
Matching Patterns | To = sip:200@
| Deploy Patterns | From = "200"<sip:200@ip>
|
|
|
Back to top |
|
tomzhu Brekeke Member
Joined: 29 Sep 2008 Posts: 10
|
Posted: Sun Mar 22, 2009 6:41 pm Post subject: |
|
|
Hi hope, thanks for your reply.
But your method will replace the callerID(caller's number) if I'm not wrong. I have to keep both callerID and dialed number in order to perform correct operation.
Is there any other methods I can use? |
|
Back to top |
|
hope Brekeke Master Guru
Joined: 15 Jan 2008 Posts: 862
|
|
Back to top |
|
|