DialPlan Name Replacement

seetarc · Posted: Fri Jan 16, 2009 4:36 pm Post subject: DialPlan Name Replacement

1. Brekeke Product Name and version: 2.1.6.6

2. Java version: 1.6.0.100

3. OS type and the version: Win2003 Server Standard

4. UA (phone), gateway or other hardware/software involved: RadiusCat and IVRCat

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :

6. Your problem: I do Calling card call Thru and Call back. My call thru extension number on BSS 1111 and Call Back 2222

When userphone xxx want to call phone number yyy this is what happens;
xxx ==> 1111, then
1111 ==> yyy
then yyy see CallerID 1111 calling. How can i change the url to show xxx calling rather than 1111 ?

For CallBack, Same Senerio

xxx Calls 2222, then get busy tone

2222 calls xxx then
2222 calls yyy then yyy see CallerID 1111 calling. How can i change the url to show xxx calling rather than 2222 ?

james · Brekeke Master Guru Joined: 10 Dec 2007 Posts: 501

Do you want to replace the From header (as caller-ID) to "xxx "?

seetarc · Posted: Mon Jan 19, 2009 1:17 pm Post subject:

Yes i want to replace the From header "1111" or "2222" to show "xxx" when "yyy" recieved the call.

hope · Brekeke Master Guru Joined: 15 Jan 2008 Posts: 862

Matching Patterns

$request = ^INVITE
$geturi(From) = (sip:1111@.+)

Deploy Patterns

From = "xxx" <%1>
$replaceuri = true

seetarc · Posted: Mon Jan 19, 2009 1:57 pm Post subject:

I will have to test it tonight. However xxx and yyy always change and could be anything numbers. It is only 1111 and 2222 that always remains the same.

james · Brekeke Master Guru Joined: 10 Dec 2007 Posts: 501

Did you try the DialPlan above which 'hope' suggested?

>> However xxx and yyy always change and could be anything numbers.

For this, Alias feature may meet your requirement..
http://www.brekeke-sip.com/wiki/index.php?telepark.wiki=df05855a

seetarc · Posted: Tue Jan 20, 2009 1:55 pm Post subject:

I tested now and it did not work.

I tried to used the url you sent me. But i could not see any [New Alias} page under [Dial Plan]

Please go to the [Dial Plan] -> [New Alias} page.

james · Brekeke Master Guru Joined: 10 Dec 2007 Posts: 501

Try the latest version.. it is the version 2.2.

seetarc · Posted: Tue Jan 20, 2009 2:14 pm Post subject:

I will upgrade at night and test tomorrow

seetarc · Posted: Wed Jan 21, 2009 1:40 pm Post subject:

I upgraded overnight and unfortunatly i could not see any [New Alias} page under [Dial Plan] I am using Standard commercial, i guess its only the Pro version that have that feature.

Back to Square one.
Let me re-define my issue again;

Caller = xxx
Callee = yyy
IVR = IVRCAT

LEG1 of the Call, xxx ==> 1111 (IVRCAT),

LEG2 of the Call, 1111 (IVRCAT) ==> yyy

Callee(yyy) sees Caller as "1111" (IVRCAT)

How can i change the caller-ID so that the Callee will see xxx as the caller ?

james · Brekeke Master Guru Joined: 10 Dec 2007 Posts: 501

Try this.

Matching Patterns

$request = ^INVITE
$geturi(From) = @(.+)

Deploy Patterns

From = sip:xxx@%1
$replaceuri = true

seetarc · Posted: Thu Jan 22, 2009 1:53 pm Post subject:

Thanks James,

xxx always change. It could be any phone number

If i use "From = sip:xxx@%1 " it will only show what i define as "xxx" (Am i wrong ?)

james · Brekeke Master Guru Joined: 10 Dec 2007 Posts: 501

I think you need to read the DialPlan tutorial guide.
You may find many sample DialPlan rules there.

seetarc · Posted: Sat Jan 24, 2009 7:14 pm Post subject:

I have read the DialPlan tutorial guide over and over again and i dont know how to create the replacement dial plan for two different call legs "url-replacement". That is why i came to the forum for help.

james · Brekeke Master Guru Joined: 10 Dec 2007 Posts: 501

>> Yes i want to replace the From header "1111" or "2222" to show "xxx" when "yyy" recieved the call.

Try this.

Matching Patterns

$request = ^INVITE
From = sip:1111@|sip:2222@
To = sip:yyyy@
$geturi(From) = @(.+)

Deploy Patterns

From = sip:xxx@%1
$replaceuri = true