Author |
Message |
visagarwal Brekeke Newbie
Joined: 24 Nov 2008 Posts: 2
Location: india
|
Posted: Mon Nov 24, 2008 11:46 pm Post subject: how to configure linksys ATA adapter with brekeke? |
|
|
1. Brekeke Product Name and version: PBX 2.2.5.8
2. Java version: Jre6.0
3. OS type and the version: windows xP Proff.
4. UA (phone), gateway or other hardware/software involved:
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :
6. Your problem: I an trying to using my Linksys Ata PAp2t adapter with Brekeke sip server but i am unable to configure the right setting. i tried a lot but in vain.
i just want to configure it in my local lan (interanet) not on internet.
Pl. Help me
thanks in advance
vishal
india
|
|
Back to top |
|
lakeview Brekeke Master Guru
Joined: 15 Nov 2007 Posts: 319
Location: Florida
|
Posted: Wed Nov 26, 2008 6:07 pm Post subject: |
|
|
Have you read the Linksys's documents?
What kind of settings do you want to know? |
|
Back to top |
|
visagarwal Brekeke Newbie
Joined: 24 Nov 2008 Posts: 2
Location: india
|
Posted: Wed Nov 26, 2008 11:23 pm Post subject: re: |
|
|
actually i want to talk in my local lan with analog phone, ATA adaptor and Bre. sip server. my local server ip is 192.168.7.20. i don't know how to configure ata adaptor with this ip. pl. help.
Thanks in Adv.
vishal |
|
Back to top |
|
lakeview Brekeke Master Guru
Joined: 15 Nov 2007 Posts: 319
Location: Florida
|
Posted: Sun Nov 30, 2008 1:24 am Post subject: |
|
|
I think you need to read the gateway's document at first..
Because you need to specify the SIP Server's IP address (192.168.7.20) in the settings of the gateway..
Good luck. |
|
Back to top |
|
|