URI / Requester Ports

damatta · Posted: Fri Oct 24, 2008 12:42 pm Post subject: URI / Requester Ports

1. Brekeke Product Name and version: Brekeke SIP Server , Version 2.1.6.6 Standard

2. Java version: 1.5.0_14

3. OS type and the version: Windows 2003 Entreprise

4. UA (phone), gateway or other hardware/software involved: Grandstream HT-486

5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html : 9

6. Your problem: Noticed that sometimes UA registers with different ports for SIP-URI and REQUESTER. That makes me losing incoming traffic from PSTN (DID). Any help will be deeply appreciated. Smile

lakeview · Posted: Fri Oct 24, 2008 1:36 pm Post subject:

Are UA clients behind NAT?
Disable STUN at UA settings.

damatta · Posted: Fri Oct 24, 2008 2:14 pm Post subject:

Yes, behind NAT. But, no STUN configured.

lakeview · Posted: Fri Oct 24, 2008 5:03 pm Post subject:

go to server's GUI -> [Configuration] -> [SIP] -> [NAT traversal].
And select [Add 'rport' parameter (Receive)] = "true".

Try it.

damatta · Posted: Sat Oct 25, 2008 4:04 am Post subject:

It did not work out... Sad

lakeview · Posted: Mon Oct 27, 2008 12:04 pm Post subject:

Try the latest beta version..
http://www.brekeke.com/download/download_sip_beta.php

It has improved NAT detection feature.

damatta · Posted: Tue Oct 28, 2008 3:05 am Post subject:

No success after upgrade. Worst: now ALL DID's can't receive calls. BSS sends error 486 (busy here) for ALL incoming calls. Please help.

lakeview · Posted: Tue Oct 28, 2008 3:03 pm Post subject:

Are you using Brekeke PBX ?

damatta · Posted: Tue Oct 28, 2008 3:06 pm Post subject:

Yes, I am.

lakeview · Posted: Tue Oct 28, 2008 3:27 pm Post subject:

Do you have a user in the PBX?
If not, you need to create certain users in the PBX.

damatta · Posted: Tue Oct 28, 2008 3:37 pm Post subject:

We have both: PBX and BSS users.

lakeview · Posted: Tue Oct 28, 2008 3:45 pm Post subject:

Hi damatta,

Can you paste 486 error response packet here?
Or, can you see"User-Agent" header in the response packet?

damatta · Posted: Tue Oct 28, 2008 6:21 pm Post subject:

Incoming traffic issue solved (NAT problem, not).Thanks.

Harold · Posted: Tue Oct 28, 2008 11:45 pm Post subject:

Try this DialPlan rule.

Matching Patterns

$request = ^REGISTER
$globaladdr( Contact ) = true
$addr = (.+)
$globaladdr( "%1" ) = true
$port = (.+)

Deploy Patterns

&register.contact.addrport = %1:%2
&register.contact.nat = true
$continue = true

damatta · Posted: Wed Oct 29, 2008 2:08 am Post subject:

After applying this Dial Plan, some lines became RED. So, I assume there are synthax errors.

Matching Patterns

$globaladdr(Contact) = true
$globaladdr("%1") = true

Deploy Patterns

&register.contact.addrport = %1:%2
&register.contact.nat = true

lakeview · Posted: Wed Oct 29, 2008 11:13 am Post subject:

Hi all,

Harold's DialPlan seems no problem.

>> After applying this Dial Plan, some lines became RED. So, I assume there are synthax errors.

Don't worry. you can use these variables.
These variables are new from version 2.2 beta.. so they are not listed in the DialPlan's spell checker.

damatta · Posted: Wed Oct 29, 2008 6:14 pm Post subject:

Fine now

lakeview · Posted: Wed Oct 29, 2008 6:39 pm Post subject:

Wow..

Does Harold's DialPlan solve the issue??

damatta · Posted: Thu Oct 30, 2008 10:10 am Post subject:

Well, partially... Signalling issue was solved (can receive calls) but not media (no audio).

lakeview · Posted: Thu Oct 30, 2008 11:23 am Post subject:

Did you set "RTP-Relay=on"??
If not, try it.

damatta · Posted: Mon Nov 10, 2008 1:23 pm Post subject:

Yes, RTP Relay setting is ON and RTP relay (UA on this machine) is AUTO.