Author |
Message |
Eric_Lopez Brekeke Newbie
Joined: 08 Sep 2008 Posts: 2
Location: Mexico
|
Posted: Mon Sep 08, 2008 10:41 am Post subject: I need contact a gateway FXO but i need ring directly a numb |
|
|
1. Brekeke Product Name and version:2.1.6.6 Standar
2. Java version:
3. OS type and the version:Windows 2003
4. UA (phone), gateway or other hardware/software involved:Welltech SIP 3840 FXO GATEWAY 4 port
5. Select your network pattern from http://www.brekeke-sip.com/bbs/network/networkpatterns.html :00073401 its my ID
6. Your problem: I need to contact an FXO gateway. This gateway its connected to PBX trough analog extension, but i need send some digits for ring an especific extensión into the PBX (i dont need take the dial tone) in Brekeke Sip Server we can contact a UA and send after the contact 2 or more digits????
please i need your help
|
|
Back to top |
|
lakeview Brekeke Master Guru
Joined: 15 Nov 2007 Posts: 319
Location: Florida
|
Posted: Mon Sep 08, 2008 11:28 am Post subject: |
|
|
Hi Eric,
Brekeke PBX's ARS feature can meet your requirement because it can generate digits when it connects the gateway.
Try Brekeke PBX. |
|
Back to top |
|
Eric_Lopez Brekeke Newbie
Joined: 08 Sep 2008 Posts: 2
Location: Mexico
|
Posted: Mon Sep 08, 2008 11:52 am Post subject: |
|
|
Thanks my friend
we have now instalated 1 SIP SERVER that support 150 Gateways FXS around the country, its working very well but now for a necesity we need install a FXO gateway but in fxs operation we ring in to an ext in the PBX, in FXO like you know we receive a local dial tone for dial an ext into the PBX, the problem its that we need ring an ext like FXS (without the user intervention transparent mode for the user) but i read the DIAL PLAN TUTORIAL but i dont read nothing for add digits after the contact to the gateway.
some IDEA??????? |
|
Back to top |
|
lakeview Brekeke Master Guru
Joined: 15 Nov 2007 Posts: 319
Location: Florida
|
Posted: Mon Sep 08, 2008 5:55 pm Post subject: |
|
|
Hi Eric,
>> in FXO like you know we receive a local dial tone for dial an ext into the PBX,
It seems your FXO gateway is a Two-Stage-Dialing.
So please configure the gateway to One-Stage-Dialing. If so, you will not hear a dial-tone. and the gateway rings an ext without any intervention.
(You need to check your gateway's document..)
If your gateway doesn't support a One-Stage-Dialing.. I recommend you to use Brekeke PBX.. because it can send dial-digits automatically without any user side's intervention.. |
|
Back to top |
|
|